Topic: Question about Portblocking

The content of this topic has been archived on 14 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Page 1 of 1

Post #1

xeno

3 Mar 2008, 09:40

Hi,

i have a Linksys WAP54G and i need some information about openwrt:

If i connect two clients to the AP, what is possible to block some ports between them? Can i use the webinterface or can i add a "forward" rule via ssh?

The goal is, that an embedded system connect to the AP and is fixed to use HTTP/VOIP/etc. I did some tests with dd-wrt, but it seems that the internal bridging make it impossible to do that.

Regards, Stefan

The discussion might have continued from here.

Page 1 of 1