Hi All,

I am running the above setup, and i spent the entire day yesterday configuring and playing with my router to get it just right.

Unfortunately, at the very last hour, i decided to issue a reboot to make sure that an application server (webapp) was installed correctly.

The router failed to boot back into my image, i was able to press the usb coipy button which in this case copies a fail safe boot loader, but was pretty much mystified as to what the problem could be because it keeps occurring.

I did set boot_dev to /dev/ide/host0/target0/lun0 etc etc etc /part1 and even read into the root2x.sh shell script which is the script that you are instructed to run to copy the boot environment over to part1 but alas, i could not find my out of this.

I was able to mount my partition part1 and see that my partitions are still intact and all my data  is still on the hard disk, but how to boot to it remains a mystery.  Can some one give me some usefull information here on where to look, and i will do the research to figure it out.

thanks

Ron