Hi, I have successfully compiled & used hplip on kamikaze 7.09 (compiled on trunk, used on 7.09).
The Makefile I used is slightly modified from:
http://lists.openwrt.org/pipermail/open … 01661.html
to satisfy dependencies. Here it is:
#
# Copyright (C) 2006 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
# $Id: $
include $(TOPDIR)/rules.mk
PKG_NAME:=hplip
PKG_VERSION:=2.7.12
PKG_RELEASE:=2
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=@SF/hplip
PKG_MD5SUM:=ba00337ccf1b520509518bffbec960db
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
PKG_BUILD_DEPENDS:=python
include $(INCLUDE_DIR)/package.mk
define Package/hplip
SECTION:=utils
CATEGORY:=Utilities
TITLE:=HP Linux Imaging and Printing
URL:=http://sourceforge.net/projects/hplip/
DEPENDS+= +libjpeg +sane-libs +cups +libusb
endef
define Package/hplip/description
HPLIP is an HP developed solution for printing, scanning, and faxing with HP inkjet and laser based printers in Linux.
endef
define Build/Configure
$(call Build/Configure/Default, \
--disable-gui-build \
--disable-network-build \
--disable-fax-build \
--disable-pp-build \
--disable-doc-build \
--disable-foomatic-xml-install \
)
endef
define Build/Compile
$(call Build/Compile/Default, \
)
endef
define Package/hplip/install
$(INSTALL_DIR) $(1)/usr/lib
$(CP) $(PKG_BUILD_DIR)/.libs/libhpip.so* $(1)/usr/lib/
$(CP) $(PKG_BUILD_DIR)/.libs/libhpmud.so* $(1)/usr/lib/
$(INSTALL_DIR) $(1)/usr/lib/cups/backend
$(INSTALL_BIN) $(PKG_BUILD_DIR)/.libs/hp $(1)/usr/lib/cups/backend
$(INSTALL_DIR) $(1)/usr/lib/sane
$(CP) $(PKG_BUILD_DIR)/.libs/libsane-hpaio.so* $(1)/usr/lib/sane
$(INSTALL_DIR) $(1)/etc/hp
$(CP) $(PKG_BUILD_DIR)/hplip.conf $(1)/etc/hp/hplip.conf
$(INSTALL_DIR) $(1)/usr/share/hplip/data/models/
$(CP) $(PKG_BUILD_DIR)/data/models/models.dat $(1)/usr/share/hplip/data/models/
endef
$(eval $(call BuildPackage,hplip))
The compiled package is here:
http://misha680.googlepages.com/hplip_2 … mipsel.ipk
Misha