The content of this topic has been archived on 10 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hi !
i compiled actual trunk and all i can get on console is:
PC Engines ALIX.2 v0.98
640 KB Base Memory
261120 KB Extended Memory
01F0 Master 848A SanDisk SDCFB-32
Phys C/H/S 490/4/32 Log C/H/S 490/4/32
GRUB Loading stage1.5.
GRUB loading, please wait...
Press any key to continue.
Press any key to continue
When i mount 1st part of cf vmlinuz is only a link to ../../x86/boot/vmlinuz
Or do i have to do more than dd if=imagefile /dev/sdc ?
ciao gerd
Try with:
sudo dd if=bin/openwrt-x86-ext2.image of=/dev/sdX
sudo syncI prefer the image with EXT2 file system.
(Last edited by forum2008 on 18 Mar 2008, 10:36)
Hi !
AFAIR the etx2 image was same thing (i tried ext2 before squashfs)
i can't recompile because i have only a SL 10.0 (my 10.3 oss mainboard crashed and i have to wait for some days to get a new one...)
ciao gerd
The discussion might have continued from here.