OpenWrt Forum Archive

Topic: wifi toggle ses button problem

The content of this topic has been archived on 9 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
vincent_19
21 Mar 2008, 01:29

since i've built in a 1gb sd card the ses led is orange.
now i want to configure the button to toggle wifi. i used this wiki http://wiki.openwrt.org/OpenWrtDocs/Cus … WifiToggle
(also the alterntive) but with no result.

that's the error message i get.
-ash: cannot create /proc/diag/led/ses_white: Directory nonexistent

i put the hole / directory to the sd card..

Filesystem                Size      Used Available Use% Mounted on
none                       7.0M     44.0k      6.9M   1% /tmp
/dev/mtdblock/4       2.0M      1.8M    244.0k  88% /jffs
mini_fo:/jffs             1.2M      1.2M         0 100% /mnt
/dev/mmc/disc0/part1    953.0M     22.4M    882.2M   2% /

Post #2
tcsoft
23 Mar 2008, 12:03

same here. i think you cant use the ses-button for hotplug-events anymore

Post #3
forum2008
23 Mar 2008, 12:30

If you are using the SES button GPIO for the SD you cannot use the GPIO for anything else...

The discussion might have continued from here.