When installing new packages on my WL-500gP V2, I see the following warnings in the logs:

Warning: DQ5 raised while program operation was in progress, however operation completed OK

The warning may appear multiple (e.g. 3) times for each package, however everything seems to work correctly.

As I remember from the old times when I was writing a hardware FLASH controller for FPGA in VHDL, DQ5 going high does not always mean, that the operation has failed, especially if one uses the "data polling" algorithm to monitor the status of the operation (details here http://www.amd.com/us-en/assets/content … 22358B.pdf, e.g. in the figure 5).

Is the above message normal, and may be ignored, or does it mean that some parameters in the OpenWRT require adjustment on this particular platform?

(Last edited by wzab on 24 Mar 2008, 14:04)