I have some probles with connecting to my Ap which is a cisco 350 series...
My WRT54G iwconfig settigns :

eth1      IEEE 802.11-DSF  ESSID:"xxxxx"
          Mode:Managed  Channel:13  Access Point: xx:xx:xx:xx:xx:xx
          Bit Rate:11Mb/s   Tx-Power=15 dBm
          Retry limit:0   RTS thr=100 B   Fragment thr=1500 B
          Encryption key:off
          Link Quality:2/5  Signal level:-74 dBm  Noise level:-256 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0
The problem is that i have 70% signal strength acording to the cisco's web interface but i can connect only @ 1 mbps and my pings to the ap is 3000ms average...
Btw rts= 100 and frag=1500 are set by the ap

thx..