just flashed wrtgsv2(hyperwrt) with openwrt-wrt54gs-squashfs.bin(1.4 mb) and now i can't flash back to hyperwrt.
tried over tftp but no luck.
is it a boot_wait problem?
any help!?
thx in advance
Topic: problem with flashing
The content of this topic has been archived on 4 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
nvram set clkfreq=216; nvram commit;
if you have a WRT54G v2.2. The CFE ethernet driver breaks when trying to flash some images without it.
The discussion might have continued from here.
Page 1 of 1