After a day of messing around, I got Slimserver to run on OpenWRT! I present my notes here, I might possibly flesh them out some more in the following days.
My setup
* Asus WL-500gP
* Kamikaze 7.09
* External usb-drive (HDD)
* One partition of the usb-drive mounted at /opt
* 128 MB swap on usb-drive
Install optware
* See http://forum.openwrt.org/viewtopic.php?pid=59141#p59141
I still needed OptWare, so here is what I found.
If you add "src optware http://ipkg.nslu2-linux.org/feeds/optwa … s/unstable "
to your /etc/ipkg.conf
and then ipkg update
and ipkg install ipkg-optYou can then use ipkg-opt to install optware stuff.
You'll need to add: "src optware http://ipkg.nslu2-linux.org/feeds/optwa … s/unstable "
to you /opt/etc/ipkg.conf file.You'll also want to remove it from the /etc/ipkg.conf file.
There are also so helpful instructions on this over here: http://www.nslu2-linux.org/wiki/OpenWrt/HomePage, but please note they reference the wrong repository.
Good luck!
* Edit PATH in /etc/profile:
export PATH=/opt/bin:/opt/sbin:/bin:/sbin:/usr/bin:/usr/sbin* Create /etc/init.d/optware:
#!/bin/sh /etc/rc.common
START=99
sleep 5
start() {
i=0
while [ $i -le 30 ]
do
if [ -d /opt/etc/init.d ]; then
for i in /opt/etc/init.d/S*; do
$i start 2>&1
done | logger -s -p 6 -t '' &
break
fi
sleep 1
i=`expr $i + 1`
done
}
stop() {
i=0
while [ $i -le 30 ]
do
if [ -d /opt/etc/init.d ]; then
for i in /opt/etc/init.d/K*; do
$i stop 2>&1
done | logger -s -p 6 -t '' &
break
fi
sleep 1
i=`expr $i + 1`
done
}* chmod 755 /etc/init.d/optware
* /etc/init.d/optware enable
Install MySQL
* ipkg-opt install libuclibc++
* ln -s /opt/lib/libuClibc\+\+-0.2.3.so /opt/lib/libstdc++.so.6
* ipkg-opt install mysql
Install SlimServer
* ipkg-opt install perl-compress-zlib
* mkdir -p /opt/home/slimserver
* ipkg-opt install slimserver
* chown -R slimserver:slimserver /opt/home/slimserver/
* ln -s /opt/init.d/S99slimserver /opt/init.d/K60slimserver
* Edit /opt/etc/slimserver.conf:
# Edit this to suit your setup
SLIMSERVER_USER="slimserver"
SLIMSERVER_GROUP="slimserver"
SLIMSERVER_HTTPPORT=9000
SLIMSERVER_HOME="/opt/home/slimserver"
SLIMSERVER_PREF="/opt/home/slimserver/slimserver.pref"
SLIMSERVER_LOG="/opt/var/log/slimserver.log"
SLIMSERVER_ARGS=" "
SLIMSERVER_EXTERN=yes
SLIMSERVER_START=yes
SLIMSERVER_PIDFILE=/opt/var/lib/slimserver.pid
SLIMSERVER_BIN=/opt/share/slimserver/slimserver.pl
SLIMSERVER_CACHEDIR=/opt/home/slimserver/cacheI hope I haven't forgotten anything. If anyone finds any errors in this howto, please reply in this thread.
Happy listening,
punkt
(Last edited by punkt on 13 Apr 2008, 22:41)
