Hi guys,
I have been messsing with Kamikaze 7.09 of OpenWRT on my recently bought Buffalo WHR-G54S and cannot seem to get wireless with DHCP to work.
I have changed in /etc/config/wireless the line of "option disabled 1" and commented it out, now wireless shows up.
I can connect to it, but i cannot get an IP address.
If i manually specify an IP address on the laptop/psp, etc. i can connect to the internet and browse etc, but without manually specifying, i get nothing.
What do i need to change to get DHCP working for wireless?
--
Also on another note, i am also unable to find any information on how to change the device into pure AP mode, so that my other router dishes out the IP's, etc via DHCP and this Buffalo just passes it on instead of using router mode and just dish out its own ip range, etc.
Also, i cannot manage to change the IP range/subnet for when it is in router mode.
This is probably documented elsewhere but i have wasted countless hours at work, at home & while travelling to try and find this information out with no success 
--
Also does anyone have scripts to be execute upon side "Mode" button change between AP & Auto?
(Last edited by morphix on 27 Apr 2008, 04:18)