Hi all,

I'm new to openWRT, I will use the router for HSDPA conections trough USB modem. But I'm having trouble setting up the NIC's. After installation I dont have any NIC working.

My /etc/config/network looks like this:

# Copyright (C) 2006 OpenWrt.org

config interface loopback
        option ifname   lo
        option proto    static
        option ipaddr   127.0.0.1
        option netmask  255.0.0.0

config interface lan
        option ifname   eth0
        option type     bridge
        option proto    static
        option ipaddr   192.168.1.1
        option netmask  255.255.255.0

Does someone have a working config file for alix 2C3 board? or some info how to set up the NIC's.

Thank you for help.

Regards,