hi all... can anyone help me unbrick my wrt350n it's totally screwed... i am unable to ping 192.168.1.1 i already did a reset, by holding less than 5 seconds after powering on. holding reset button for 30 seconds. still nothing, i was able to ping and tried tftp but still no good. i read somewhere in this forum bout jtag cable or hacking a dku-5 nokia cable, i totally don't get how to do both... can someone help me please, deseperate to fix. i also saw i tutorial on how to open the hardware, but i don't know what to do after that.. can some post a step-by-step guide for me to work on... thanks

the hardware isn't mine! thanks in advance

(Last edited by perfectjudith on 5 May 2008, 14:13)

If you did brick it you will need to either do JTAG or a serial cable to recover it. There really isn't anything step by step, but there are recovery guides available if you search. Should you still require it, I can tell you what you need to do and what you will need to get a working serial cable to the unit.