Hi, i've been fighting with a linksys wag200g for days. It seems i cannot find a way to enter the adam2 bootloader. ADAM2 env variables seems to be ok (at least my_ipaddress and autoload), but there's no way to ftp into it or tftp-put an image.
Anyone had luck with this router?
Topic: WAG200G: blocked ADAM2?
The content of this topic has been archived on 5 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
teknuso wrote:
Hi, i've been fighting with a linksys wag200g for days. It seems i cannot find a way to enter the adam2 bootloader. ADAM2 env variables seems to be ok (at least my_ipaddress and autoload), but there's no way to ftp into it or tftp-put an image.
Anyone had luck with this router?
did you solve?
I would like to install openwrt on a wag200g...but which target should i choose?
michelinok76 wrote:
did you solve?
I would like to install openwrt on a wag200g...but which target should i choose?
no, i had no time to investigate anymore. what appears clear is that the adam2 bootloader on this device is blocked and built without ftp nor tftp. so the first step is building a new bootloader and upload it to the device (probably using the jtag interface, but i may be wrong).
as for the target: this is an ar7 device, so you should compile the ar7 port from the subversion repository.
The discussion might have continued from here.
Page 1 of 1