Hello All,

I have a fon 2100 running Kamikaze trunk.  The problem that I am having is that it will not boot with the serial port attached to any device.  I have removed the serial console from the kernal so this is not the issue, in fact this is before that is loaded anyway.

What is happening is that if the fon gets shutdown with the serial attached it will not boot again, its like redboot is trying to init something. If i remove the serial connection from the fon then power cycle it again it will boot.  If i unplug the serial , shutdown the fon , plug the serial back in , then power up the fon it works.

This is a pain as it makes it so the fon can not be rebooted remotely or of it looses power it locks up on boot.  Any idea's how to get around this?  Can you disable serial access in redboot?

--Jason