I saw a page detailing how to flash Linux onto a DI524 router. http://www.hwhack.com/viewtopic.php?f=9&t=5
With that, is it possible to run OpenWRT on it?

It uses an unsupported CPU and we don't support 2MB flash 8MB ram devices, not enough space to provide a system that supports anything more than a minimal feature set.

Oops, didn't read the whole article
hehe
Maybe I'll just put linux on it

EDIT: On a hack-related note, I added a second antenna to this router.

Right above the trace for the first antenna, if you de-solder the little SMD thing (I'm not sure what it is L20-something) and solder in a wire, and run it out of the box, you get another antenna. Not sure what it's good for, but still.

(Last edited by brnat on 3 Jul 2008, 00:57)

I was helping this guy bring up his device with OpenWRT 7.09.

http://wiki.openwrt.org/OpenWrtDocs/Har … C/WBR14-G2

Maybe you can try.

This is what we went through back and forth trying to bring up AR2317 up.

http://forum.openwrt.org/viewtopic.php?id=15492

There was a big thread between him and me trying to resolve some of the issues.

Unfortunately your link did not work and I can't tell what chip set DI524 uses.

(Last edited by yoonix on 10 Jul 2008, 23:59)