I've made an initial port of OpenWrt to Actiontec's mk424-wr. I've submitted a patch already.
But for this to be useful, redboot is also required. I've packaged my changes in an eCos .epk.
The question is what to do with this eCos patch? I see that there's an Apex bootloader in svn.
Are there plans to add eCos/Redboot? The reason for not using Apex is that redboot allows
access to the bootloader via telnet.
Topic: MI424-WR port and redboot
The content of this topic has been archived on 28 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
The discussion might have continued from here.
Page 1 of 1