Hi,
Any one working on Openwrt for Livebox Mini (Sagem version with Ikanos vx-160) ?
Here is bootlog from console :
regards
Benoit
------------------
SAGEM Secure-boot v2.4 for ADI chipset
CPU: ADI Fusiv 160 Family
DRAM: 64 MB
Flash: 16 MB
Using default environment
In: serial
Out: serial
Err: serial
voxEmac
good regular firmware
partition not moved
Launch regular code from flash
## Booting image at bf7c0140 ...
Image Name: adi_kernel_2.6
Created: 2008-01-10 14:33:55 UTC
Image Type: MIPS Linux Kernel Image (gzip compressed)
Data Size: 1483161 Bytes = 1.4 MB
Load Address: 80010000
Entry Point: 80379000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting kernel ...
Linux version 2.6.12.6 (gardnerk@cplx147.edegem.eu.thmulti.com) (gcc version 3.4.3) #1 Thu Jan 10 15:33:46 CET 2008
CPU revision is: 6836c400
Determined physical RAM map:
memory: 00001000 @ 00000000 (usable)
memory: 00001000 @ 00001000 (reserved)
memory: 03ffe000 @ 00002000 (usable)
Initial ramdisk at: 0x80000000 (0 bytes)
Built 1 zonelists
Kernel command line: root=/dev/mtdblock6 ro rootfstype=squashfs operational_start=0xbf7c0000 rescue_start=0xbf120000 myfs_start=0xbf940000 type=operational
Primary instruction cache 16kB, linesize 32 bytes.
Primary data cache 8kB, linesize 32 bytes.
Synthesized TLB refill handler (17 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (25 instructions).
PID hash table entries: 512 (order: 9, 8192 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 60288k/65532k available (2769k kernel code, 5148k reserved, 719k data, 136k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... unavailable.
checking if image is initramfs... it is
NET: Registered protocol family 16
Fusiv PCI: starting...
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
squashfs: version 3.1 (2006/08/19) Phillip Lougher
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
Serial: 8250/16550 driver $Revision: 2.1 $ 2 ports, IRQ sharing disabled
ttyS0 at MMIO 0xb9020000 (irq = 6) is a 16450
io scheduler noop registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PPP generic driver version 2.4.2
NET: Registered protocol family 24
On Board flash device: 0x1000000 at 0x1f000000
Number of erase regions: 1
Primary Vendor Command Set: 0002 (AMD/Fujitsu Standard)
Primary Algorithm Table at 0040
Alternative Vendor Command Set: 0000 (None)
No Alternate Algorithm Table
Vcc Minimum: 2.7 V
Vcc Maximum: 3.6 V
No Vpp line
Typical byte/word write timeout: 128 µs
Maximum byte/word write timeout: 1024 µs
Typical full buffer write timeout: 128 µs
Maximum full buffer write timeout: 4096 µs
Typical block erase timeout: 1024 ms
Maximum block erase timeout: 16384 ms
Chip erase not supported
Device size: 0x1000000 bytes (16 MiB)
Flash Device Interface description: 0x0002
- supports x8 and x16 via BYTE# with asynchronous interface
Max. bytes in buffer write: 0x20
Number of Erase Block Regions: 1
Erase Region #0: BlockSize 0x20000 bytes, 128 blocks
ADI flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
ADI flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 6 MTD partitions on "ADI flash":
0x00000000-0x00020000 : "Bootloader Partition"
0x00020000-0x00040000 : "Factory Partition"
0x00040000-0x00120000 : "User Partition"
0x00120000-0x007c0000 : "Rescue FW"
0x007c0000-0x00940000 : "Operational FW"
0x00940000-0x01000000 : "Squashfs RootFS"
vox160-ehci-hcd vox160-ehci-hcd.0: EHCI Host Controller
vox160-ehci-hcd vox160-ehci-hcd.0: new USB bus registered, assigned bus number 1
vox160-ehci-hcd vox160-ehci-hcd.0: irq 35, io mem 0x19230000
vox160-ehci-hcd vox160-ehci-hcd.0: park 0
vox160-ehci-hcd vox160-ehci-hcd.0: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
vox160-ohci-hcd vox160-ohci-hcd.0: ADI VOX160 OHCI
vox160-ohci-hcd vox160-ohci-hcd.0: new USB bus registered, assigned bus number 2
vox160-ohci-hcd vox160-ohci-hcd.0: irq 35, io mem 0x19240800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Livebox Button API has been initialized
u32 classifier
OLD policer on
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
ip_conntrack version 2.1 (512 buckets, 4096 max) - 288 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Relay Driver Starting...
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
SYSINIT
LIVEBOX version : 6.3.8.4
Mounting proc filesystem ...
Mounting usb filesystem...
Mounting tmpfs filesystem (/var) ...
Mounting tmpfs filesystem (/tmp) ...
Mounting devpts filesystem (/dev/pts) ...
fusivlib_lkm: module license 'proprietary' taints kernel.
fusiv library initializing...
fusiv library initialized SUCCESSFULLY...
Added AP PREROUTE Hook
Added AP POSTROUTE Hook
Buffer Manager is initializing...
Slave Mem Alloc: Req size 16 Ptr2Block 0x191f0000
Load into BM APU Successful !!!
Timers are getting initalized
Timers are initilized SUCCESSFULLY...
Slave Mem Alloc: Req size 16 Ptr2Block 0x191f0010
Slave Mem Alloc: Req size 16 Ptr2Block 0x191f0020
Ethernet Driver is initialized SUCCESSFULLY
Slave Mem Alloc: Req size 8 Ptr2Block 0x191f0030
Slave Mem Alloc: Req size 72 Ptr2Block 0x191f0038
Slave Mem Alloc: Req size 120 Ptr2Block 0x191f0080
Slave Mem Alloc: Req size 192 Ptr2Block 0x191f00f8
Slave Mem Alloc: Req size 256 Ptr2Block 0x191f01b8
ATM Driver Initialized SUCCESSFULLY...
periApDriverInit: doneSlave Mem Alloc: Req size 16 Ptr2Block 0x191f02b8
*******LOAD firmware to AP:PERI_ID result:0Load into PERI_AP APU Successful !!!
> NORMAL BOOT <
> BOOT SYSTEM <
Mounting other filesystems ...
Switching to RUNLEVEL 1 ...
*********************** Starting script /etc/rc1.d/S03firewall at: 7.87 1.46
*********************** Starting script /etc/rc1.d/S03nat at: 8.90 1.46
*********************** Starting script /etc/rc1.d/S04adsl at: 9.31 1.46
adsl start ...
ADSL Starting ...
Resetting adsl DSP
*********************** Starting script /etc/rc1.d/S05hardware at: 10.61 1.46
No LED/Buttons support...
Starting ATH WLAN...
wlan: 0.8.4.2 (Atheros/multi-bss)
ath_hal: 0.9.17.1 (AR5212, RF5111, RF5112, RF2413, RF5413)
ath_rate_atheros: Version 2.0.1
Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
ath_pci: 0.9.4.5 (Atheros/multi-bss)
PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
ath_attach: Fast Path Test Code Compiled Jan 10 2008 15:45:01
ar5212SetResetReg: set to big endian
Setting ah_eepromDetach
**** Going to ath_hal_readEepromIntoDataset
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: mac 7.8 phy 4.5 radio 5.6
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0x1a000000, irq=25
wlan: mac acl policy registered
Dev Address: 00:1d:6a:xx:xx:xx
wl0
Dev Address: 06:1d:6a:xx:xx:xx
wl1
*********************** Starting script /etc/rc1.d/S15syslogd at: 20.29 1.46
*********************** Starting script /etc/rc1.d/S16voice1 at: 20.59 1.46
Voice part 1 start ...
*********************** Starting script /etc/rc1.d/S20network at: 20.80 1.46
Local network configuration ...
Ethernet network configuration ...
Hostname configuration : LIVEBOX
*********************** Starting script /etc/rc1.d/S22gatewayd at: 22.25 1.46
loading geniodb kernel modules...
Thomson geniodb driver: Loading ...
Thomson geniodb driver: Loading finished with SUCCESS
gatewayd start ...
Warning: ripData not initialized. Calling hco_rip_init() first!
wait for gatewayd to initialise (1)
wait for gatewayd to initialise (2)
Lock created on /var/run/mbusd_system pid:785
Lock created on /var/run/mbusd pid:786
Lock created on /var/run/mbusd_atomic pid:786
[ADSL PLUGIN] Plugin 'DSL_MBUS' Plugin successfully registerd !
[ADSL PLUGIN] Plugin 'DSL_MBUS' Successfully registered !
[ADSL PLUGIN] Plugin 'DSL_MBUS' ADSL API device char successfully open!
[ADSL PLUGIN] Plugin 'DSL_MBUS' Successfully registered !
Starting to monitor the gatewayd process...
wait for gatewayd to initialise (3)
Warning: ripData not initialized. Calling hco_rip_init() first!
wait until stage >= 71 (current stage=22)
End of initialisation
wait until stage >= 60 (current stage=22)
*********************** Starting script /etc/rc1.d/S23qos at: 34.60 1.46
wait until stage >= 71 (current stage=23)
wait until stage >= 60 (current stage=23)
*********************** Starting script /etc/rc1.d/S24resolvd at: 36.02 1.46
Resolv daemon start ...
wait until stage >= 71 (current stage=24)
wait until stage >= 60 (current stage=24)
*********************** Starting script /etc/rc1.d/S40nlplugd at: 36.77 1.46
wait until stage >= 71 (current stage=40)
wait until stage >= 60 (current stage=40)
nlplugd start ...
Initializing.
Lock file '/var/run/mbusd_atomic' exists and is locked.
Starting netlink plugin
Lock created on /var/run/NL_PLUGIN_MBUS pid:921
Daemonize netlink plugin
*********************** Starting script /etc/rc1.d/S41iptplugd at: 37.62 1.46
iptplugd start ...
Lock created on /var/run/IPT_PLUGIN_MBUS pid:935
Daemonize iptables plugin
wait until stage >= 71 (current stage=42)
*********************** Starting script /etc/rc1.d/S42mbus_wland at: 38.21 1.46
wait until stage >= 60 (current stage=42)
MBUS start: ath_wland
Lock created on /var/run/NL_PLUGIN_MBUS pid:923
Lock created on /var/run/WLAN pid:951
ar5212SetResetReg: set to big endian
ar5212SetResetReg: set to big endian
Warning: ripData not initialized. Calling hco_rip_init() first!
*********************** Starting script /etc/rc1.d/S45dhccd at: 38.86 1.46
dhccd start ...
Lock created on /var/run/IPT_PLUGIN_MBUS pid:937
wait until stage >= 71 (current stage=45)
wait until stage >= 60 (current stage=45)
*********************** Starting script /etc/rc1.d/S650atomicstopload at: 39.37 1.46
wait until configuration load reaches phase 5 (now -1, 1s)
wait until stage >= 71 (current stage=65)
stage 60 reached (current stage=65)
appbox: start loading after [ 6080ms ]
stage 60 reached (current stage=65)
stage 61 reached (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 71 (current stage=65)
stage 62 reached (current stage=65)
stage 63 reached (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 71 (current stage=65)
stage 64 reached (current stage=65)
wait until stage >= 71 (current stage=65)
ar5212SetResetReg: set to big endian
ar5212SetResetReg: set to big endian
ar5212SetResetReg: set to big endian
wait until stage >= 71 (current stage=65)
wait until configuration load reaches phase 5 (now 4, 2s)
QOS: vpi 8 vci 35
wait until stage >= 71 (current stage=65)
QOS: vpi 8 vci 38
QOS: vpi 8 vci 39
QOS: vpi 8 vci 40
QOS: vpi 8 vci 41
wait until stage >= 71 (current stage=65)
wait until stage >= 71 (current stage=65)
QOS: vpi 8 vci 50
QOS: vpi 8 vci 51
wait until stage >= 71 (current stage=65)
wait until stage >= 71 (current stage=65)
device eth0 entered promiscuous mode
bridge: port 1(eth0) entering learning state
bridge: topology change detected, propagating
bridge: port 1(eth0) entering forwarding state
device wl0 entered promiscuous mode
bridge: port 2(wl0) entering learning state
bridge: topology change detected, propagating
bridge: port 2(wl0) entering forwarding state
device eth1 entered promiscuous mode
bridge: port 3(eth1) entering learning state
bridge: topology change detected, propagating
bridge: port 3(eth1) entering forwarding state
wait until stage >= 71 (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 71 (current stage=65)
stage 65 reached (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 66 (current stage=65)
Configuration file: /tmp/hostapd.conf.0
*********************** Starting script /etc/rc1.d/S651usb-host at: 72.82 1.84
bridge: port 2(wl0) entering disabled state
Using interface wl0 with hwaddr 00:1d:6a:xx:xx:xx and ssid 'Livebox-yyzz'
wait until stage >= 71 (current stage=65)
wait until stage >= 66 (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 66 (current stage=65)
wl0: RADIUS Authentication sar5212SetResetReg: set to big endian
erver 127.0.0.1:1812
bridge: port 2(wl0) entering learning state
bridge: topology change detected, propagating
bridge: port 2(wl0) entering forwarding state
Flushing old station entries
Deauthenticate all stations
wait until stage >= 66 (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 66 (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 66 (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 66 (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 66 (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 66 (current stage=65)
wait until stage >= 71 (current stage=65)
usbmgr[1285]: start 0.4.8
usbmgr[1285]: sleep time -1 micro sec
Name: /etc/usbmgr/usbmgr.conf
Load_from_file: /etc/usbmgr/preload.conf
wait until stage >= 66 (current stage=65)
usbmgr[1287]: [USB_MBUS]Plugin 'USB_MBUS' successfully registered!
usbmgr[1287]: [USB_MBUS]succeed to create listening thread
Lock created on /var/run/USB_MBUS pid:1295
wait until stage >= 71 (current stage=65)
wait until stage >= 66 (current stage=65)
wait until stage >= 71 (current stage=65)
usbmgr[1287]: buffer line: remove T
usbmgr[1287]: class:0x9 subclass:0x0 protocol:0x0
usbmgr[1287]: try /etc/usbmgr/class/09/00/00/module
usbmgr[1287]: try /etc/usbmgr/class/09/00/module
usbmgr[1287]: try /etc/usbmgr/class/09/module
usbmgr[1287]: try /etc/usbmgr/class/module
usbmgr[1287]: USB device isn't matched the configuration
usbmgr[1287]: buffer line: remove T
*********************** Starting script /etc/rc1.d/S65devdiscd at: 83.01 6.45
Device Discovery start ...
wait until stage >= 66 (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 66 (current stage=65)
wait until stage >= 71 (current stage=65)
devdiscd: Daemonized with blocked parent process
wait until stage >= 66 (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 66 (current stage=65)
devdiscd: Parent process released.
*********************** Starting script /etc/rc1.d/S65ezpFTplugin at: 86.54 7.44
Starting EasyPairingPlugin
wait until stage >= 71 (current stage=65)
Initializing.
Registering metadata to mbusd.
Finished (no error).
wait until stage >= 66 (current stage=65)
*********************** Starting script /etc/rc1.d/S65fwupdate at: 87.47 7.44
FW Update daemon (Karma) start ...
wait until stage >= 71 (current stage=65)
Livebox2 Firmware Upgrade Client
Copyright Thomson Telecom Belgium - 2006
-II- fwupdated daemonizing..
wait until stage >= 66 (current stage=65)
wait until stage >= 71 (current stage=65)
*********************** Starting script /etc/rc1.d/S65network2 at: 88.43 7.44
Ethernet network configuration ...
wait until stage >= 66 (current stage=65)
wait until stage >= 71 (current stage=65)
*********************** Starting script /etc/rc1.d/S65todd at: 90.12 7.44
Timeofday start ...
wait until stage >= 66 (current stage=65)
[TOD MAIN] Initializing.
[TOD MAIN] Initialization successful.
[TOD MAIN] daemonizing..
wait until stage >= 71 (current stage=65)
wait until stage >= 66 (current stage=65)
wait until stage >= 71 (current stage=65)
Lock file '/var/run/mbusd_atomic' exists and is locked.
Lock file '/var/run/mbusd_atomic' exists and is locked.
Lock created on /var/run/tod_plugin pid:1379
wait until stage >= 66 (current stage=65)
wait until stage >= 71 (current stage=65)
wait until stage >= 71 (current stage=65)
*********************** Starting script /etc/rc1.d/S70stopload at: 93.29 7.44
stage 66 reached (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until configuration load reaches phase 10 (now 6, 1s)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
stage 67 reached (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until configuration load reaches phase 10 (now 7, 2s)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until configuration load reaches phase 10 (now 7, 3s)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
orange hostname: xxxxx.mobile.orange.fr
[p2] generate_wifi_hotspot_id
[p2] generate_wifi_hotspot_id:
[p2] looking for lac orange, 0x10005468
[p2] lac orangebis, 0x10005468
[p2] lac orange, 0x10005208
[p2] looking for lac orangebis, 0x10005468
[p2] lac orangebis, 0x10005468
port 1701
This binary does not support kernel L2TP.
l2tpd version 0.69 started on LIVEBOX PID:1457
Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc.
Forked by Scott Balmos and David Stipp, (C) 2001
Inhereted by Jeff McAdams, (C) 2002
Linux version 2.6.12.6 on a mips, port 1701
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
info, Moreton Bay DHCP Server (v0.1) started
ENTERING this function, server_state_machine_init
info, TODO IMPORTANT : liberer la memoire utilisee par les options.
ENTERING this function, radius_init_server
info, Attaching option domain to list
info, Attaching option lease to list
info, Utilisation du fichier de pid : /var/run/wacd.pid
debug, ESSID : communaute-livebox, res : 18
[p2] ESSID : communaute-livebox, res : 18[p2] radius acct: 0x10003068
[p2] radius acct server: yyyyyy.mobile.orange.fr
stage 68 reached (current stage=70)
stage 70 reached (current stage=70)
wait until stage >= 71 (current stage=70)
appbox: end loading
wait until stage >= 71 (current stage=70)
Upnp init ...
wait until stage >= 71 (current stage=70)
MyConfig in /etc/upnp.conf:
Debug=0
descDocName: gatedesc.xml
xmlPath: /var
g_iptables: /usr/sbin/iptables
g_forwardChainName: upnp
g_preroutingChainName: upnp
g_upstreamBitrate: 0
g_downstreamBitrate: 0
retrieving the address
creating a socket
performing the SIOCGIFADDR ioctl
found ifaddr '192.168.1.1' for bridge
creating pid file
wait until stage >= 71 (current stage=70)
Lock created on /var/run/UPnP pid:1496
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
INFO : IGD root device successfully registered.
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
device atm_1 entered promiscuous mode
bridge_0: port 1(atm_1) entering learning state
bridge_0: topology change detected, propagating
bridge_0: port 1(atm_1) entering forwarding state
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
device atm_2 entered promiscuous mode
bridge_0: port 2(atm_2) entering learning state
bridge_0: topology change detected, propagating
bridge_0: port 2(atm_2) entering forwarding state
wait until stage >= 71 (current stage=70)
wait until stage >= 71 (current stage=70)
*********************** Starting script /etc/rc1.d/S72hostmgr at: 119.55 7.44
INFO : Advertisements Sent. Listening for requests ...
stage 71 reached (current stage=72)
device atm_3 entered promiscuous mode
bridge_0: port 3(atm_3) entering learning state
bridge_0: topology change detected, propagating
bridge_0: port 3(atm_3) entering forwarding state
stage 71 reached (current stage=72)
device atm_4 entered promiscuous mode
bridge_0: port 4(atm_4) entering learning state
bridge_0: topology change detected, propagating
bridge_0: port 4(atm_4) entering forwarding state
device eth1 left promiscuous mode
bridge: port 3(eth1) entering disabled state
br_del_if() : is called with apId 2
hostmgr start ...
device eth1 entered promiscuous mode
bridge_0: port 5(eth1) entering learning state
bridge_0: topology change detected, propagating
bridge_0: port 5(eth1) entering forwarding state
Lock created on /var/run/Hostmanager pid:1539
*********************** Starting script /etc/rc1.d/S75appweb at: 127.48 7.44
Starting appWeb
*********************** Starting script /etc/rc1.d/S76dslupd at: 131.48 7.44
Dslupdate start ...
Lock created on /var/run/ATMQOS pid:1565
*********************** Starting script /etc/rc1.d/S77tppp at: 134.57 7.44
tppp start ...
Lock created on /var/run/TPPP pid:1593
Lock created on /var/run/TPPP_IGD pid:1593
*********************** Starting script /etc/rc1.d/S80telnetd at: 138.70 7.44
telnetd start ...
*********************** Starting script /etc/rc1.d/S81ezp_ctl at: 139.39 7.44
EasyPairing Management Deamon start: ezpairingctl
Lock created on /var/run/ezp_atom pid:1614
*********************** Starting script /etc/rc1.d/S90wacd-wifi-community at: 140.38 7.44
WacD is still started with pid 1462
Exiting /etc/rc1.d/S90wacd-wifi-community
*********************** Starting script /etc/rc1.d/S98pwrledstop at: 141.52 7.44
pwrledstart stop ...
debug, RADIUS_S_ADDR FAILED : xxxxx.mobile.orange.fr
[p2] radius access: 0x10003080
[p2] primary radius access server: yyyyy.mobile.orange.fr
wl0 enabled
*********************** Starting script /etc/rc1.d/S98voice2 at: 142.87 7.44
Voice part 2 start ...
creating nodes
loading module
##################################################
# DSP Voice Module Part 1 Loading ...
Using: Software Build(voice_2_6 : Thu Dec 8 10:33:40 PST 2005)
# DSP Voice Module Part 1 Loading Ok
##################################################
##################################################
# RTP Stack Module Loading ...
Register /dev/rtp Device ... OK
Init Mutex, WaitQueue, Events List ... OK
Init RTP Pool List session ... OK
Allocate RTP SLAB session [min(1) size(1040)] ... OK
Allocate RTP Element session [nb(10) size(20)] ... 0 1 2 3 4 5 6 7 8 9 OK
Register to DSP ... OK
# RTP Stack Module Loading Ok
##################################################
Loading module usb-dect
##################################################
# Generate Voice Module Loading ...
Register to DSP ... OK
# Generate Voice Module Loading Ok
##################################################
##################################################
# DECT Upper Module Loading ...
Init Base Device:
Init File Operator, Callbacks, Parameters ... OK
Init Voice Device:
Init Mutex, List, WaitQueue, Cdev, Parameters ... OK
Add Cdev ... OK
Init Channel/Handset ... (0/0) (1/1) (2/2) (3/4) (4/8) (5/16) (6/32) (7/64) OK
Init Ctrl Device:
Init Mutex, Cdev, Parameters ... OK
Add Cdev ... OK
# DECT Upper Module Loading Ok
##################################################
##################################################
# DECT Extended HID Module Loading ...
Init HID Device ... OK
USB Register ...
usbcore: registered new driver usbhid
/vobs/dbw/5g/system/usbdect/sagem/usb-dect/D45WB-2-6/hid-core/hid-core.c: v2.01:USB HID core driver
---> OK
# DECT Extended HID Module Loading Ok
##################################################
##################################################
# DECT Lower Version(20060731-1540-2.6) Module Loading ...
Init driver ... OK
Register to Extended HID ... OK
Register to USB ...
usbcore: registered new driver sagem dect
---> OK
# DECT Lower Module Loading Ok
##################################################
libep_FXS_c
on##################################################
st# DSP Voice Module Part 2 Loading ...
ructCould not find DSP configuration file, setting to defaults
orSave and reboot the system to effect the Codec Mode : 2
: Save and reboot the system to effect the Codec Mode : 2
BegiSave and reboot the system to effect the Codec Mode : 2
n
Save and reboot the system to effect the Codec Mode : 2
libep_FXS_constructor: End
libep_constructor: Begin
libep_constructor[FXS]: Allocated memory driver_libep(0x101b1530)
libep_constructor[FXS]: Allocated memory libep(0x101aaa98)
libep_constructor[FXS]: Type driver(0)
Total words found in /dsp/dsp218x_1ch_faxonly.dsp Image 31948
Total words found in /dsp/dsp218x_1ch_g723only.dsp Image 31948
Total words found in /dsp/dsp218x_1ch_g729only.dsp Image 31948
Total words found in /dsp/dsp218x_1ch_3wayonly.dsp Image 31948
Registering Call Back Handlers
get buffer c046e000
Setting path=Voice, param=StartDriver, value=1 successfully!
DSP TIME SLOT Assigned:260
DSP CLock Assigned:22
DSP Codec Type Assigned:2
DSP TIME SLOT Assigned:40
DSP CLock Assigned:22
DSP Codec Type Assigned:2
ADSP218x DOWNLOAD DONE !!!!
DSP Ver No:1.1
Initializing SLIC and VOICE Wait Queues
Initializing Voice
Initializing SPI Module
Product Code: ff ff
Assuming SLIC card as SILABS
Initializing SLICs
SLIC Initializaton for Silabs on VX160 Platform
Codec[0] => Chip Type [0] Chip Version [3]
VBAT Calibration = 0xB7
vBat Power Leak Test = 0x23
VBAT Calibration = 0xBA
*********************** Starting script /etc/rc1.d/S99gwmonit at: 151.70 7.44
Stop monitoring the gatewayd process...
RING Gain Calibration OK.
TIP Gain Calibration OK.
Size : 33
End of SI3216 Initialization. codecNo 0
SLIC Initializaton for Silabs on VX160 Platform
UNABLE TO COMMUNICATE WITH SI3216. codecNo 1
FXO Initialized Successfully
Activate SLICs => 2
osAssignInterrupt: Enable IRQ(17) for DSP
Enable IRQ for DSP
osAssignInterrupt: Enable IRQ(21) for DSP
Enable IRQ for DSP
DSP System Initialized Successfully
# DSP Voice Module Part 2 Loading Ok
##################################################
libep_constructor[FXS]: Open /dev/dsp
libep_constructor: DRIVER_LEP_FLAGS [ set DEV_OPEN]
libep_constructor: DRIVER_LEP_FLAGS [ DEV_OPEN, set INDEX_INIT]
libep_constructor: End
driver_libep_cnf: Begin
driver_libep_cnf-201: (STACK->DRIVER-FXS: LEP_CNF_LOG] LidectUpper_devOpen: OPEN voice(c0360600) device
bepdectUpper_devOpen: Insert DECT_GLOBAL_INIT_DONE EVENT
(0xdectUpper_sendEvt: Send On First Event(0) on dev voice(c0360600)
101aaa98dectUpper_devOpen: OPEN ctrl(c0361ec0) device
) -> Not implemented yet
driver_libep_cnf: Begin
driver_libedectUpper_devRead: READ on voice(c0360600) device
p_cdectUpper_devRead: Extract event(0)
nf(0x101aaa98): [STACK->DRIVER-FXS: LEP_CNF_COUNTRY]
driver_libep_cnf: COUNTRY FR
driver_libep_cnf(0x101aaa98): DRIVER->DEV: [ DSP_SET_COUNTRYOPT ] country(0)
driver_libep_cnf: End
driver_libep_init: Begin
driver_libep_init: DRIVER_LEP_FLAGS [ DEV_OPEN, INDEX_INIT, set INITIALIZE]
driver_libep_init[FXS]: Initialize FXS for channel(0) on libep(0x101aaa98)
driver_ep_init: Begin
driver_ep_init[FXS]: Allocated memory driver_rtp(0x101afd90)
driver_ep_init[FXS]: Allocated memory driver_ep(0x101b0180)
driver_ep_init[FXS]: Allocated memory Ep(0x101ba600)
driver_default_ep_fxs_audio: Begin
driver_default_ep_fxs_audio[FXS:CHANNEL_0]: Allocated memory audio_fxs(0x101b1378)
driver_default_ep_fxs_audio: channel(0) Vad(0) Plc(1) Ec(1) Gain(0)
driver_default_ep_fxs_audio: encoder[ dtmf_det(1) codec(2) dtmf_rej(1) g168(1) g168TailLen(80) ]
driver_default_ep_fxs_audio: decoder[ codec(2) ton_gen(1) ]
driver_default_ep_fxs_audio: End
driver_ep_init[FXS]: Register EP(0x101ba600)
driver_ep_cnf: Begin
driver_ep_cnf(0x101ba600): [STACK->DRIVER-FXS: EP_CNF_LINK_MODE] with link_mode(1)
driver_ep_cnf: Link_mode(1) MODE_NORMAL
driver_ep_cnf: End
driver_ep_init: DRIVER-EP-SIG-FLAGS [ set REGISTER_EP]
driver_ep_init: End
driver_libep_init: DRIVER_LEP_FLAGS [ INITIALIZE, DEV_OPEN, INDEX_INIT, set USED]
driver_libep_init[FXS]: Register FD(68)
driver_libep_init: DRIVER_LEP_FLAGS [ INITIALIZE, USED, DEV_OPEN, INDEX_INIT, set REGISTER_FD]
driver_libep_init: End
driver_libep_cnf: Begin
driver_libep_cnf(0x101aaa98): [STACK->DRIVER-FXS: LEP_CNF_COUNTRY]
driver_libep_cnf: COUNTRY FR
driver_libep_cnf(0x101aaa98): DRIVER->DEV: [ DSP_SET_COUNTRYOPT ] country(0)
driver_libep_cnf: End
pstn_constructor: Begin
pstn_constructor: DRIVER-PSTN-FLAGS [ set INITIALIZE]
pstn_constructor-1376: Open /dev/fxo
pstn_constructor: DRIVER-PSTN-FLAGS [ INITIALIZE, set DEV_OPEN]
pstn_constructor: End
driver_pstn_init: Begin
driver_pstn_init: Register FD(67)
driver_pstn_init: DRIVER-PSTN-FLAGS [ INITIALIZE, DEV_OPEN, set REGISTER_FD]
driver_pstn_init: End
libep_DECT_constructor: Begin
libep_DECT_constructor: End
libep_constructor: Begin
libep_constructor[DECT]: Allocated memory driver_libep(0x101b13a8)
libep_constructor[DECT]: Allocated memory libep(0x101b28e0)
libep_constructor[DECT]: Type driver(1)
libep_constructor[DECT]: Open /dev/dect
libep_constructor[DECT]: Open /dev/dectCmd
libep_constructor: DRIVER_LEP_FLAGS [ set DEV_OPEN]
libep_constructor: DRIVER_LEP_FLAGS [ DEV_OPEN, set INDEX_INIT]
libep_constructor: End
driver_libep_cnf: Begin
driver_libep_cnf-201: (STACK->DRIVER-DECT: LEP_CNF_LOG] Libep(0x101b28e0) -> Not implemented yet
driver_libep_init: Begin
driver_libep_init: DRIVER_LEP_FLAGS [ DEV_OPEN, INDEX_INIT, set INITIALIZE]
driver_libep_init[DECT]: Wait for Initialize DECT on libep(0x101b28e0)
driver_libep_init[DECT]: Register FD(69)
driver_libep_init: DRIVER_LEP_FLAGS [ INITIALIZE, DEV_OPEN, INDEX_INIT, set REGISTER_FD]
driver_libep_init: End
driver_libep_cnf: Begin
driver_libep_cnf(0x101b28e0): [STACK->DRIVER-DECT: LEP_CNF_COUNTRY]
driver_libep_cnf-175: Cnf country on DECT -> Not implemented yet !
driver_libep_cnf: End
rtp_constructor: Allocated rtp_driver
rtp_constructor: Open /dev/rtp
rtpVoip_cmd: Begin cmd(6)
rtpVoip_cmd: End
driver_libep_on_fxs_fd_activity: Begin
driver_libep_on_fxs_fd_activity(0x101aaa98): [EVT->FXS: DSPIPC_RESET_ALL_PORTS_DONE]
driver_libep_on_fxs_fd_activity: DRIVER-STACK-FLAGS [ set FXS_INITIALIZE]
driver_libep_on_fxs_fd_activity: End
driver_libep_on_dect_fd_activity: Begin
driver_libep_on_dect_fd_activity(0x101b28e0): [EVT->DECT: DECT_GLOBAL_INIT_DONE]
dectUsb_applMapBase: FAILURE -> DECTUSB: Get List Handset
driver_libep_on_dect_fd_activity: FAILURE -> Dect get map base
driver_libep_on_fxs_fd_activity: Begin
driver_libep_on_fxs_fd_activity(0x101aaa98): [EVT->FXS: SLIC_OFFHOOK_EVENT] on port(1)
driver_get_all_context_with_fxs_index:-1310): Return FAILURE -> Bad channel(1) max(1)
*********************** Starting script /etc/rc1.d/S99printkoff at: 156.10 7.44
Setting printk off
Next bootmode set to : system (ok)
Sysinit done.
Please press Enter to activate this console. WARNING: could not resolve primary radius accress server iiiii.mobile.orange.fr !
[p2] secondary radius access server: oooooo.mobile.orange.fr
LIVEBOX login: WARNING: could not resolve secondary radius accress server 32333.mobile.orange.fr !
[p2] primary radius access server port: 1812
[p2] secundary radius access server port: 1812
[p2] radius shared secret: xxxxx
info, Executing cmd : iptables -A FORWARD_hotspot -j DROP
info, Executing cmd : /usr/sbin/ip ru del prio 40 from 0.0.0.0
RTNETLINK answers: No such process
getting if flags: No such device
foo 1
^@þ^@Ÿ^@$^@^^^@þ
Please press Enter to activate this console.
LIVEBOX login: