Hi!
I have a WRT54G v2.2.

Yesterday, i have had a problem during the firmware flash with openwrt. I think the flash process has been imcomplete because it never ended up and know I have the following problems:

- No Web interface (Err 404)
- router answer to ping on 192.168.1.1
- router reachable trough telnet on 192.168.1.1
- it seems that somes files are missing: /www is empty. nvram is not available...

So i am a bit stucked... I can't use my router . So i tried a tftp firmware upgrade: I have not benn able to do it: with TFTP2.exe , i have now answer from the router on 192.168.1.1 (I have tried dozen of times...). (at the boot up, i have the following led sequence: Power led flashing for about 5 seconds, then, power led continues flashing and DMZ is on for about 5 seconds. Then DMZ is off, and power led is on. )
How can i flash the firmware directly from the command line on openwrt ? I have not the "write" command.

Thank you for your help !

First of all NVRAM isn't of use on kamikaze. Everything is in the /etc/config/
Normally a webinterface isn't available. You need to install it! Or you flash your router with a X-WRT version

Thanks for your help!
That's a good news.
Apparently,my openwrt is running normaly. It seems that i have taken bad habits with ddwrt.
Sorry for the misunderstanding.

So, how can i install a web ionterface now (or update to W-wrt without tftp).

Thank you in advance!