Greetings to all bros and sis !

       I have trouble in configuring a bond inetrface in my Gateworks board running with OpenWrt's Kamikaze latest trunk. I enabled the bond driver and i was able to bring up a bond0 interface  using 'ifconfig bond0 195.168.1.30 up' command. But there was no effect on the system , I couldnt even ping it from my eth0 Iface. I have four radio  interfaces too, for which I  would be using this bond interface to be the master.

I see no config files related to bond interface in /etc/..

regards and thank you all