I have a unknow board whit 16mb flash i like to put openwrt on budt this is the only thing that happens..

http://paste-it.net/public/y4c5010/

BCM5354 rev 3 at 240 MHz
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.130.31.0

Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "boot"
mtd: Giving out device 0 to boot
0x00040000-0x00ff0000 : "linux"
mtd: Giving out device 1 to linux
0x00123ba0-0x00ff0000 : "rootfs"
mtd: Giving out device 2 to rootfs
0x00ff0000-0x01000000 : "nvram"
mtd: Giving out device 3 to nvram
0x00000000-0x01000000 : "all"

can i get openwrt on it?

Thanks.

got it working whit latest 2.4 snapshopt

2.6 made kernel panic log here.

http://paste-it.net/public/j185a4b/