Hello!, my asus wl500w is bricked... All light LAN1,lan2,lan3,lan4 and Wan are ON, and power and ir leds OFF. I tried pin9 method.. hard reset 30/30/30 but nothing....
I need know the jtag pinouts of this router
Can anyone help me?
Thank you!
Topic: JTAG Asus WL-500W
The content of this topic has been archived on 16 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
Hi
Have a look at this post
You have to isnatll a USB-to-Serial converter if you solder the port as on a linksys WRT you'll fry the thing as soon as you connect the jtag cable to your PC.
Good luck with your debcricking The fun part.
The discussion might have continued from here.
Page 1 of 1