Hi, I have unsuccessfully flashed g700ap,
now there is no access to flash
jtag> detect
IR length: 5
Chain length: 1
Device Id: 00010101001010000000000000001101
Manufacturer: Lexra
Part: LX5280
Stepping: 1
Filename: /usr/local/share/jtag/lexra/lx5280/lx5280
chain.c(110) Part 0 without active instruction
chain.c(133) Part 0 without active instruction
jtag> detectflash 0x3fc00000
ImpCode=00001010110000000000000111100000
EJTAG version: <= 2.0
EJTAG Implementation flags: R4k ASID_8 MIPS32
jedec_detect: mid 0, did 0
Flash not found!
jtag>
How correctly initialize the processor from jtag, for flashing boot ?
what commands to enter ?
here chips datasheets
Cpu RTL8186 (http://www.mattei.ca/download.php?view.11)
Flash S29AL016D90TFI020 (http://www.datasheetarchive.com/pdf-dat … 628994.pdf)
Ram ESMT M12L64164A-7T (http://www.datasheetarchive.com/pdf-dat … 673803.pdf)
p.s. my english i bad
(Last edited by ser1983 on 9 Mar 2009, 09:15)