OpenWrt Forum Archive

Topic: WRT54gl v1.1 SD Mod

The content of this topic has been archived on 5 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
prgrmr
12 Mar 2009, 15:18

Hi, i want to add an SD card to my wrt54gl router.

From this wiki picture it's looks like GPIO 4 is soldered to GPIO 7, is this the right way or i should solder 4 to 4 and 7 to 7?

Thanks in advanced.

Post #2
kastrolis
14 Mar 2009, 01:56

look better at picture.
in reality it is not as you described.

The discussion might have continued from here.