Hi all

I am a beginner in Openwrt (and English Language:-(
Sorry for my bad english!

I have installed lirc with the follow commands:

opkg install lirc
opkg install lirctools
opkg install lircdaemonadd

And now i have search in the Internet, Openwrt Wiki and Forums for
Documentation for the Infrared Led Connection with my Router (wrt54gl).

But i cant find anything :-(

The Device /dev/lircd will exists and i can execute the following command:

irsend SEND_ONCE TECHNISAT_ST3004S POWER

But I have no idea where the Infrared Led should be connected.

The green Led on the front side of the Router dont blink when
executing the irsend command.

And on the serial Interface, it is not possible to use DCD,DTR or RTS    
for this interface: http://www.lirc.org/transmitters.html

For any help, many thanks.

Many greetings from switzerland

Dusty