Topic: max power consumption for mini-PCI card in WL-500gP v1

The content of this topic has been archived on 5 Feb 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Page 1 of 1

Post #1

zorxd

27 Apr 2009, 20:50

Hi
I plan to replace the broadcom mini-PCI card for an atheros 802.11a/b/g/n. The AR9160+AR9106 is a 3x3 MIMO and should perform better than the AR9220 single chip (2x2 MIMO), but also consume about the double (1.6A vs 800mA for Tx).

Do you know if both cards will be supported by the WL-500gP ?

The discussion might have continued from here.

Page 1 of 1