is possible use a wrt54g3g (kamikaze 8.09) like a switch (only layer 2, only cable)?
thanks
(Last edited by kalcla on 3 May 2009, 10:13)
Topic: use wrt543g like a switch
The content of this topic has been archived on 5 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
Erm... the LAN side of an average SOHO router is practically a 4-port Ethernet switch. I don't own such a router, so I did a quick search for its parameters, and the datasheet says that there are 4 ports on the LAN side. Consequently, the answer is yes.
yes, you can even configure the switch to use all 5 ports (including WAN)
The discussion might have continued from here.
Page 1 of 1