The content of this topic has been archived on 21 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
I'm having problems getting Batman advanced working with the access point in access point mode?
It works fine in adhoc mode. They are both running OpenWrt Kamikaze 8.09. Do I need to create two networks one for clients to connect on and the other running the mesh?
Hi,
I'm running bat-adv using the kernel module batman_ad.ko without any trouble. i've setup ath0:0 in ahdemo and ath0:1 in adhoc mode. I am documenting the setup in this howto: http://debian.asconix.com/batman-advanced-openwrt-howto
It's German, but i think it's clean enough to extract the idea behind the setup ;-)
Regards,
Chris
I'm having problems getting Batman advanced working with the access point in access point mode?
It works fine in adhoc mode. They are both running OpenWrt Kamikaze 8.09. Do I need to create two networks one for clients to connect on and the other running the mesh?
The discussion might have continued from here.