OpenWrt Forum Archive

Topic: Netgear DG834

The content of this topic has been archived on 29 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
HellFire
18 May 2009, 07:48

I can't get it to run on my DG834v1

After flashing:

Erase Successful.
DG834 > go
File for wrong Endian!:ffffffff

Image i'm using is openwrt-ar7-squashfs.bin

Post #2
HellFire
19 May 2009, 02:34

Problem sorted. Replaced ADAM2 with PSPBoot

Post #3
HellFire
26 Jun 2009, 21:52

Redone it to update the ADSL firmware as the old one was unstable, but i can't get it to work this time and i don't remember what i did.

(psbl) printenv
mtd0            0x90096000,0x90400000
mtd1            0x90020090,0x90096000
mtd2            0x90000000,0x90010000
mtd3            0x90010000,0x90020000
mtd4            0x90020000,0x90400000

(psbl) setenv mtd5 0x90020090,0x90400000

(psbl) FlashEraseBlock(b0020000,b03fffff);
..............................................................
...................................................

(psbl) boot

OS boot failed.

* Edit: Fixed it. did setenv BOOTCFG m:f:"mtd5"
* Edit 2: redone with mtd4 to get a little more space.

(Last edited by HellFire on 26 Jun 2009, 22:19)

The discussion might have continued from here.