OpenWrt Forum Archive

Topic: WPA refuses to work on 8.09 w/ WRT54GS v2.1

The content of this topic has been archived on 21 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
gshearer
25 May 2009, 08:46

I've tried both 2.4 and 2.6 flavors... I can't seem to get my kamikaze install to do anything but wep encryption.. What the $#$!$!# ??


Config

config wifi-device      wl0
        option type     broadcom
        option channel  9
config wifi-iface
        option network  lan
        option device   wl0
        option mode     ap
        option ssid     blahblahtest
        option encryption       psk2
        option key      test2test

-- SSID shows up on all network scans, but WEP 128...

Any ideas would be appreciated..

Post #2
gshearer
26 May 2009, 16:43

Eh -- nevermind.. My workstation wasn't refreshing properly.

However, bcrm47xxx seems to just stop working on my WRT54GS v2.1 on occasion..

The discussion might have continued from here.