The content of this topic has been archived on 9 Feb 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
I need to return my WRT54G v2.2 to factory firmware.
When I try TFTP I get the error "timeout occured."
When I try tftp2 the error is "unable to get response."
I can access the router using TELNET but don't understand the
commands.
The KAMIKAZI webgui comes up and I can see & change many
things, however, the flash firmware won't load the Linksys
.bin file. It needs an image file.
Help please.
Larry
I found a way that worked.
Go to the dd-wrt site
http://www.dd-wrt.com/dd-wrtv3/dd-wrt/hardware.html
and download the following file:
dd-wrt.v24_mini_generic.bin
Within the webgui of Kamikazi update the firmware and
select dd-wrt.v24_mini_generic.bin
After it properly updates, (wait the time needed)
select the tab to update firware and select
the Linksys firmware needed.
The discussion might have continued from here.