Hi all,
I flashed kamikaze 7.09 to a wl500gx. I then realized that it only shows 2MB of total 4MB flash available on the wl500gx. How can I make all 4MB flash available for use?
Thanks,
David
Topic: Kamikaze 7.09 only reads 2MB flash on a wl500gx
The content of this topic has been archived on 6 Feb 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
The discussion might have continued from here.
Page 1 of 1