Hi,
this is WR rc6.
iptables -t mangle -A PREROUTING -i ppp0 -j IMQ --todev 0
iptables: No chain/target/match by that name"nvram get wan_ifname" returns ppp0. lsmod shows that imq is loaded, iptables-mod-imq is installed.
Any ideas?
greets
Topic: IMQ, iptables -j IMQ error?
The content of this topic has been archived on 2 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
The discussion might have continued from here.
Page 1 of 1