hello any idea ? anyone i am a bit stuck and have currently:
lsusb
root@OpenWrt:~# lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 1130:f211 Tenx Technology, Inc. audio headset
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0204:6025 Chipsbank Microelectronics Co., Ltd CBM2080 Flash drive controller
Bus 001 Device 003: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
logread
root@OpenWrt:~# logread
Jan 1 00:00:10 OpenWrt user.warn kernel: PCI: Enabling device 0000:00:02.0 (0000 -> 0002)
Jan 1 00:00:10 OpenWrt user.info kernel: PCI: Fixing up device 0000:00:02.0
Jan 1 00:00:10 OpenWrt user.debug kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
Jan 1 00:00:10 OpenWrt user.info kernel: ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
Jan 1 00:00:10 OpenWrt user.info kernel: ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
Jan 1 00:00:10 OpenWrt user.info kernel: ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
Jan 1 00:00:10 OpenWrt user.info kernel: ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
Jan 1 00:00:10 OpenWrt user.debug kernel: ssb: SPROM revision 2 detected.
Jan 1 00:00:10 OpenWrt user.info kernel: ssb: Sonics Silicon Backplane found on PCI device 0000:00:02.0
Jan 1 00:00:10 OpenWrt user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:10 OpenWrt user.info kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 00:00:10 OpenWrt user.info kernel: TCP established hash table entries: 1024 (order: 1, 8192 bytes)
Jan 1 00:00:10 OpenWrt user.info kernel: TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 00:00:10 OpenWrt user.info kernel: TCP: Hash tables configured (established 1024 bind 1024)
Jan 1 00:00:10 OpenWrt user.info kernel: TCP reno registered
Jan 1 00:00:10 OpenWrt user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:10 OpenWrt user.notice kernel: detected lzma initramfs
Jan 1 00:00:10 OpenWrt user.notice kernel: initramfs: LZMA lc=1,lp=2,pb=2,origSize=512
Jan 1 00:00:10 OpenWrt user.info kernel: squashfs: version 3.0 (2006/03/15) Phillip Lougher
Jan 1 00:00:10 OpenWrt user.warn kernel: Registering mini_fo version $Id$
Jan 1 00:00:10 OpenWrt user.info kernel: JFFS2 version 2.2. (NAND) (SUMMARY) Š 2001-2006 Red Hat, Inc.
Jan 1 00:00:10 OpenWrt user.info kernel: msgmni has been set to 57
Jan 1 00:00:10 OpenWrt user.info kernel: io scheduler noop registered
Jan 1 00:00:10 OpenWrt user.info kernel: io scheduler deadline registered (default)
Jan 1 00:00:10 OpenWrt user.info kernel: Serial: 8250/16550 driver2 ports, IRQ sharing enabled
Jan 1 00:00:10 OpenWrt user.info kernel: serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
Jan 1 00:00:10 OpenWrt user.info kernel: serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
Jan 1 00:00:10 OpenWrt user.info kernel: serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
Jan 1 00:00:10 OpenWrt user.info kernel: serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
Jan 1 00:00:10 OpenWrt user.info kernel: b44.c:v2.0
Jan 1 00:00:10 OpenWrt user.info kernel: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:17:31:dc:08:f7
Jan 1 00:00:10 OpenWrt user.err kernel: b44: eth1: PHY Reset would not complete.
Jan 1 00:00:10 OpenWrt user.info kernel: eth1: Broadcom 44xx/47xx 10/100BaseT Ethernet 40:10:18:00:00:2d
Jan 1 00:00:10 OpenWrt user.warn kernel: flash init: 0x1c000000 0x02000000
Jan 1 00:00:10 OpenWrt user.info kernel: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 00:00:10 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Jan 1 00:00:10 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Jan 1 00:00:10 OpenWrt user.debug kernel: Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Jan 1 00:00:10 OpenWrt user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 00:00:10 OpenWrt user.warn kernel: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan 1 00:00:10 OpenWrt user.notice kernel: number of CFI chips: 1
Jan 1 00:00:10 OpenWrt user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 00:00:10 OpenWrt user.notice kernel: Flash device: 0x800000 at 0x1fc00000
Jan 1 00:00:10 OpenWrt user.notice kernel: bootloader size: 262144
Jan 1 00:00:10 OpenWrt user.notice kernel: Creating 4 MTD partitions on "Physically mapped flash":
Jan 1 00:00:10 OpenWrt user.notice kernel: 0x00000000-0x00040000 : "cfe"
Jan 1 00:00:10 OpenWrt user.notice kernel: 0x00040000-0x007f0000 : "linux"
Jan 1 00:00:10 OpenWrt user.notice kernel: 0x00110c00-0x007f0000 : "rootfs"
Jan 1 00:00:10 OpenWrt user.warn kernel: mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
Jan 1 00:00:10 OpenWrt user.notice kernel: mtd: partition "rootfs" set to be root filesystem
Jan 1 00:00:10 OpenWrt user.info kernel: mtd: partition "rootfs_data" created automatically, ofs=4D0000, len=320000
Jan 1 00:00:10 OpenWrt user.notice kernel: 0x004d0000-0x007f0000 : "rootfs_data"
Jan 1 00:00:10 OpenWrt user.notice kernel: 0x007f0000-0x00800000 : "nvram"
Jan 1 00:00:10 OpenWrt user.info kernel: BCM47xx Watchdog Timer enabled (30 seconds, nowayout)
Jan 1 00:00:10 OpenWrt user.info kernel: TCP westwood registered
Jan 1 00:00:10 OpenWrt user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:10 OpenWrt user.info kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Jan 1 00:00:10 OpenWrt user.info kernel: All bugs added by David S. Miller <davem@redhat.com>
Jan 1 00:00:10 OpenWrt user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan 1 00:00:10 OpenWrt user.info kernel: Freeing unused kernel memory: 136k freed
Jan 1 00:00:10 OpenWrt user.warn kernel: Please be patient, while OpenWrt loads ...
Jan 1 00:00:10 OpenWrt user.warn kernel: diag: Detected 'ASUS WL-500g Premium'
Jan 1 00:00:10 OpenWrt user.info kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
Jan 1 00:00:10 OpenWrt user.info kernel: b44: eth0: Flow control is off for TX and off for RX.
Jan 1 00:00:10 OpenWrt user.info kernel: roboswitch: Probing device eth0: found!
Jan 1 00:00:10 OpenWrt user.info kernel: b44: eth0: powering down PHY
Jan 1 00:00:10 OpenWrt user.info kernel: mini_fo: using base directory: /
Jan 1 00:00:10 OpenWrt user.info kernel: mini_fo: using storage directory: /jffs
Jan 1 00:00:11 OpenWrt user.info kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
Jan 1 00:00:11 OpenWrt user.info kernel: b44: eth0: Flow control is off for TX and off for RX.
Jan 1 00:00:12 OpenWrt user.info sysinit: 0.openwrt.pool.ntp.org: Unknown host
Jan 1 00:00:12 OpenWrt user.info sysinit: 1.openwrt.pool.ntp.org: Unknown host
Jan 1 00:00:12 OpenWrt user.info sysinit: 2.openwrt.pool.ntp.org: Unknown host
Jan 1 00:00:12 OpenWrt user.info sysinit: 3.openwrt.pool.ntp.org: Unknown host
Jan 1 00:00:12 OpenWrt user.info kernel: device eth0.0 entered promiscuous mode
Jan 1 00:00:12 OpenWrt user.info kernel: device eth0 entered promiscuous mode
Jan 1 00:00:12 OpenWrt user.info kernel: br-lan: topology change detected, propagating
Jan 1 00:00:12 OpenWrt user.info kernel: br-lan: port 1(eth0.0) entering forwarding state
Jan 1 00:00:15 OpenWrt user.info kernel: cfg80211: Using static regulatory domain info
Jan 1 00:00:15 OpenWrt user.info kernel: cfg80211: Regulatory domain: US
Jan 1 00:00:15 OpenWrt user.info kernel: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 1 00:00:15 OpenWrt user.info kernel: (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
Jan 1 00:00:15 OpenWrt user.info kernel: (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 1 00:00:15 OpenWrt user.info kernel: (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 1 00:00:15 OpenWrt user.info kernel: (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 1 00:00:15 OpenWrt user.info kernel: (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 1 00:00:15 OpenWrt user.info kernel: (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
Jan 1 00:00:15 OpenWrt user.info kernel: cfg80211: Calling CRDA for country: US
Jan 1 00:00:16 OpenWrt user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:17 OpenWrt user.info kernel: usbcore: registered new interface driver usbfs
Jan 1 00:00:17 OpenWrt user.info kernel: usbcore: registered new interface driver hub
Jan 1 00:00:17 OpenWrt user.info kernel: usbcore: registered new device driver usb
Jan 1 00:00:18 OpenWrt user.info kernel: b43-phy0: Broadcom 4318 WLAN found (core revision 9)
Jan 1 00:00:18 OpenWrt user.debug kernel: phy0: Selected rate control algorithm 'minstrel'
Jan 1 00:00:18 OpenWrt user.info kernel: Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
Jan 1 00:00:18 OpenWrt user.info kernel: Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
Jan 1 00:00:19 OpenWrt user.info kernel: PPP generic driver version 2.4.2
Jan 1 00:00:20 OpenWrt user.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:21 OpenWrt user.warn kernel: Driver 'sd' needs updating - please use bus_type methods
Jan 1 00:00:21 OpenWrt user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 00:00:21 OpenWrt user.warn kernel: PCI: Enabling device 0000:00:03.2 (0000 -> 0002)
Jan 1 00:00:21 OpenWrt user.info kernel: PCI: Fixing up device 0000:00:03.2
Jan 1 00:00:21 OpenWrt user.info kernel: ehci_hcd 0000:00:03.2: EHCI Host Controller
Jan 1 00:00:21 OpenWrt user.info kernel: ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
Jan 1 00:00:21 OpenWrt user.info kernel: ehci_hcd 0000:00:03.2: irq 6, io mem 0x40002000
Jan 1 00:00:21 OpenWrt user.info kernel: ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
Jan 1 00:00:21 OpenWrt user.info kernel: usb usb1: configuration #1 chosen from 1 choice
Jan 1 00:00:21 OpenWrt user.info kernel: hub 1-0:1.0: USB hub found
Jan 1 00:00:21 OpenWrt user.info kernel: hub 1-0:1.0: 4 ports detected
Jan 1 00:00:21 OpenWrt user.warn kernel: nf_conntrack version 0.5.0 (512 buckets, 2048 max)
Jan 1 00:00:21 OpenWrt user.warn kernel: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Jan 1 00:00:21 OpenWrt user.warn kernel: nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
Jan 1 00:00:21 OpenWrt user.warn kernel: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Jan 1 00:00:22 OpenWrt user.info kernel: usb 1-2: new high speed USB device using ehci_hcd and address 3
Jan 1 00:00:22 OpenWrt user.info kernel: usb 1-2: configuration #1 chosen from 1 choice
Jan 1 00:00:22 OpenWrt user.info kernel: hub 1-2:1.0: USB hub found
Jan 1 00:00:22 OpenWrt user.info kernel: hub 1-2:1.0: 4 ports detected
Jan 1 00:00:22 OpenWrt user.info kernel: usb 1-2.1: new high speed USB device using ehci_hcd and address 4
Jan 1 00:00:22 OpenWrt user.info kernel: usb 1-2.1: configuration #1 chosen from 1 choice
Jan 1 00:00:23 OpenWrt user.info kernel: uhci_hcd: USB Universal Host Controller Interface driver
Jan 1 00:00:23 OpenWrt user.warn kernel: PCI: Enabling device 0000:00:03.0 (0000 -> 0001)
Jan 1 00:00:23 OpenWrt user.info kernel: PCI: Fixing up device 0000:00:03.0
Jan 1 00:00:23 OpenWrt user.info kernel: uhci_hcd 0000:00:03.0: UHCI Host Controller
Jan 1 00:00:23 OpenWrt user.info kernel: uhci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
Jan 1 00:00:23 OpenWrt user.info kernel: uhci_hcd 0000:00:03.0: irq 6, io base 0x00000100
Jan 1 00:00:23 OpenWrt user.info kernel: usb usb2: configuration #1 chosen from 1 choice
Jan 1 00:00:23 OpenWrt user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:23 OpenWrt user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:23 OpenWrt user.warn kernel: PCI: Enabling device 0000:00:03.1 (0000 -> 0001)
Jan 1 00:00:23 OpenWrt user.info kernel: PCI: Fixing up device 0000:00:03.1
Jan 1 00:00:23 OpenWrt user.info kernel: uhci_hcd 0000:00:03.1: irq 6, io base 0x00000120
Jan 1 00:00:23 OpenWrt user.info kernel: usb usb3: configuration #1 chosen from 1 choice
Jan 1 00:00:23 OpenWrt user.info kernel: hub 3-0:1.0: USB hub found
Jan 1 00:00:23 OpenWrt user.info kernel: hub 3-0:1.0: 2 ports detected
Jan 1 00:00:23 OpenWrt user.info kernel: usb 2-1: new full speed USB device using uhci_hcd and address 2
Jan 1 00:00:23 OpenWrt user.info kernel: usbcore: registered new interface driver snd-usb-audio
Jan 1 00:00:23 OpenWrt user.info kernel: usb 2-1: configuration #1 chosen from 1 choice
Jan 1 00:00:24 OpenWrt user.info kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:24 OpenWrt user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:24 OpenWrt user.info kernel: usbcore: registered new interface driver usb-storage
Jan 1 00:00:24 OpenWrt user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:24 OpenWrt user.debug kernel: usb-storage: device found at 4
Jan 1 00:00:24 OpenWrt user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 00:00:24 OpenWrt user.warn kernel: fuse init (API version 7.10)
Jan 1 00:00:24 OpenWrt user.warn kernel: fuse init: DCACHE_BUG enabled
Jan 1 00:00:25 OpenWrt user.info sysinit: 'wlan0' is disabled
Jan 1 00:00:25 OpenWrt user.notice root: starting ntpclient
Aug 28 14:35:01 OpenWrt user.info sysinit: 'wlan0' is disabled
Aug 28 14:35:02 OpenWrt user.info sysinit: Using intrapositioned negation (`--option ! this`) is deprecated in favor of extrapositioned (`! --option this`).
Aug 28 14:35:03 OpenWrt authpriv.info dropbear[721]: Running in background
Aug 28 14:35:04 OpenWrt auth.err sshd[727]: error: Bind to port 22 on 0.0.0.0 failed: Address already in use.
Aug 28 14:35:04 OpenWrt auth.crit sshd[727]: fatal: Cannot bind any address.
Aug 28 14:35:05 OpenWrt user.notice kernel: scsi 0:0:0:0: Direct-Access USB 2.0 Flash Disk 5.00 PQ: 0 ANSI: 2
Aug 28 14:35:05 OpenWrt user.notice kernel: sd 0:0:0:0: [sda] 16617472 512-byte hardware sectors: (8.50 GB/7.92 GiB)
Aug 28 14:35:05 OpenWrt user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
Aug 28 14:35:05 OpenWrt user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
Aug 28 14:35:05 OpenWrt user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Aug 28 14:35:05 OpenWrt user.notice kernel: sd 0:0:0:0: [sda] 16617472 512-byte hardware sectors: (8.50 GB/7.92 GiB)
Aug 28 14:35:05 OpenWrt user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
Aug 28 14:35:05 OpenWrt user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
Aug 28 14:35:05 OpenWrt user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Aug 28 14:35:05 OpenWrt user.info kernel: sda: sda1
Aug 28 14:35:05 OpenWrt user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
Aug 28 14:35:05 OpenWrt user.debug kernel: usb-storage: device scan complete
Aug 28 14:35:05 OpenWrt user.warn kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Aug 28 14:35:08 OpenWrt daemon.info dnsmasq[765]: started, version 2.49 cachesize 150
Aug 28 14:35:08 OpenWrt daemon.info dnsmasq[765]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Aug 28 14:35:08 OpenWrt daemon.info dnsmasq-dhcp[765]: DHCP, IP range 192.168.1.100 -- 192.168.1.251, lease time 12h
Aug 28 14:35:08 OpenWrt daemon.info dnsmasq[765]: using local addresses only for domain lan
Aug 28 14:35:08 OpenWrt daemon.info dnsmasq[765]: reading /tmp/resolv.conf.auto
Aug 28 14:35:08 OpenWrt daemon.info dnsmasq[765]: using nameserver 192.168.0.1#53
Aug 28 14:35:08 OpenWrt daemon.info dnsmasq[765]: using local addresses only for domain lan
Aug 28 14:35:08 OpenWrt daemon.info dnsmasq[765]: read /etc/hosts - 2 addresses
Aug 28 14:35:08 OpenWrt daemon.err dnsmasq-dhcp[765]: failed to read /etc/ethers: No such file or directory
Aug 28 14:36:43 OpenWrt authpriv.info dropbear[783]: Child connection from 192.168.0.169:1293
Aug 28 14:36:59 OpenWrt authpriv.notice dropbear[783]: password auth succeeded for 'root' from 192.168.0.169:1293
lsmod
root@OpenWrt:~# lsmod
Module Size Used by Not tainted
fuse 47296 0
usb_storage 72160 1
snd_usb_audio 59632 0
snd_usb_lib 12544 1 snd_usb_audio
uhci_hcd 20464 0
nf_nat_tftp 480 0
nf_conntrack_tftp 2512 1 nf_nat_tftp
nf_nat_irc 960 0
nf_conntrack_irc 3008 1 nf_nat_irc
nf_nat_ftp 1504 0
nf_conntrack_ftp 5248 1 nf_nat_ftp
ipt_MASQUERADE 1184 1
iptable_nat 2832 1
nf_nat 12448 5 nf_nat_tftp,nf_nat_irc,nf_nat_ftp,ipt_MASQUERADE,iptable_nat
xt_NOTRACK 704 0
iptable_raw 800 0
xt_state 864 1
nf_conntrack_ipv4 8064 4 iptable_nat,nf_nat
nf_defrag_ipv4 672 1 nf_conntrack_ipv4
nf_conntrack 42592 12 nf_nat_tftp,nf_conntrack_tftp,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_conntrack_ftp,ipt_MASQUERADE,iptable_nat,nf_nat,xt_NOTRACK,xt_state,nf_conntrack_ipv4
ehci_hcd 33584 0
sd_mod 20032 2
ipt_REJECT 2048 0
xt_TCPMSS 2144 0
ipt_LOG 4896 0
xt_multiport 2080 0
xt_mac 608 0
xt_limit 1184 0
iptable_mangle 1120 0
iptable_filter 928 1
ip_tables 8560 4 iptable_nat,iptable_raw,iptable_mangle,iptable_filter
xt_tcpudp 2112 12
x_tables 9232 12 ipt_MASQUERADE,iptable_nat,xt_NOTRACK,xt_state,ipt_REJECT,xt_TCPMSS,ipt_LOG,xt_multiport,xt_mac,xt_limit,ip_tables,xt_tcpudp
snd_pcm_oss 39552 0
snd_mixer_oss 13440 1 snd_pcm_oss
snd_pcm 57504 2 snd_usb_audio,snd_pcm_oss
snd_timer 16688 1 snd_pcm
snd_rawmidi 16640 1 snd_usb_lib
snd_seq_device 4400 1 snd_rawmidi
snd_hwdep 4624 1 snd_usb_audio
snd_page_alloc 5520 1 snd_pcm
snd 35344 8 snd_usb_audio,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_rawmidi,snd_seq_device,snd_hwdep
soundcore 3824 1 snd
ppp_async 9088 0
ppp_generic 22144 1 ppp_async
slhc 5440 1 ppp_generic
vfat 8736 0
fat 45520 1 vfat
ext3 98672 0
jbd 45248 1 ext3
ext2 46096 1
b43legacy 102784 0
b43 115008 0
nls_utf8 864 0
nls_iso8859_2 3392 0
nls_iso8859_1 2880 0
nls_cp437 4416 0
nls_cp1251 3648 0
nls_cp1250 3904 0
usbcore 104864 6 usb_storage,snd_usb_audio,snd_usb_lib,uhci_hcd,ehci_hcd
scsi_mod 74320 2 usb_storage,sd_mod
nls_base 4672 8 vfat,fat,nls_utf8,nls_iso8859_2,nls_iso8859_1,nls_cp437,nls_cp1251,nls_cp1250
mac80211 190928 2 b43legacy,b43
cfg80211 117040 3 b43legacy,b43,mac80211
mbcache 4384 0
crc_ccitt 1024 1 ppp_async
arc4 864 2
aes_generic 28880 0
wprobe 11184 0
deflate 1440 0
ecb 1376 2
cbc 2112 0
cryptomgr 71088 0
crypto_hash 2560 0
crypto_blkcipher 7600 3 ecb,cbc,cryptomgr
aead 3712 1 cryptomgr
crypto_algapi 9824 8 arc4,aes_generic,deflate,ecb,cbc,cryptomgr,crypto_blkcipher,aead
switch_robo 4096 0
switch_core 5376 1 switch_robo
diag 7568 0
opkg list_installed
root@OpenWrt:~# opkg list_installed
base-files - 26-r17398 -
busybox - 1.13.4-1 -
dnsmasq - 2.49-1 -
dropbear - 0.52-3 -
firewall - 1-5 -
hostapd-mini - 0.6.9-1 -
hotplug2 - 1.0-beta-3 -
iptables - 1.4.4-2 -
iptables-mod-conntrack - 1.4.4-2 -
iptables-mod-nat - 1.4.4-2 -
kernel - 2.6.28.10-brcm47xx-1 -
kmod-b43 - 2.6.28.10+2009-08-20-brcm47xx-1 -
kmod-b43legacy - 2.6.28.10+2009-08-20-brcm47xx-1 -
kmod-crc-ccitt - 2.6.28.10-brcm47xx-1 -
kmod-crypto-aes - 2.6.28.10-brcm47xx-1 -
kmod-crypto-arc4 - 2.6.28.10-brcm47xx-1 -
kmod-crypto-core - 2.6.28.10-brcm47xx-1 -
kmod-diag - 2.6.28.10-brcm47xx-4 -
kmod-fs-ext2 - 2.6.28.10-brcm47xx-1 -
kmod-fs-ext3 - 2.6.28.10-brcm47xx-1 -
kmod-fs-mbcache - 2.6.28.10-brcm47xx-1 -
kmod-fs-vfat - 2.6.28.10-brcm47xx-1 -
kmod-fuse - 2.6.28.10 -
kmod-ipt-conntrack - 2.6.28.10-brcm47xx-1 -
kmod-ipt-core - 2.6.28.10-brcm47xx-1 -
kmod-ipt-nat - 2.6.28.10-brcm47xx-1 -
kmod-ipt-nathelper - 2.6.28.10-brcm47xx-1 -
kmod-mac80211 - 2.6.28.10+2009-08-20-brcm47xx-1 -
kmod-nls-base - 2.6.28.10-brcm47xx-1 -
kmod-nls-cp1250 - 2.6.28.10-brcm47xx-1 -
kmod-nls-cp1251 - 2.6.28.10-brcm47xx-1 -
kmod-nls-cp437 - 2.6.28.10-brcm47xx-1 -
kmod-nls-iso8859-1 - 2.6.28.10-brcm47xx-1 -
kmod-nls-iso8859-2 - 2.6.28.10-brcm47xx-1 -
kmod-nls-utf8 - 2.6.28.10-brcm47xx-1 -
kmod-ppp - 2.6.28.10-brcm47xx-1 -
kmod-pppoe - 2.6.28.10-brcm47xx-1 -
kmod-scsi-core - 2.6.28.10-brcm47xx-1 -
kmod-sound-core - 2.6.28.10-brcm47xx-1 -
kmod-switch - 2.6.28.10-brcm47xx-2 -
kmod-usb-audio - 2.6.28.10-brcm47xx-1 -
kmod-usb-core - 2.6.28.10-brcm47xx-1 -
kmod-usb-storage - 2.6.28.10-brcm47xx-1 -
kmod-usb-uhci - 2.6.28.10-brcm47xx-1 -
kmod-usb2 - 2.6.28.10-brcm47xx-1 -
kmod-wprobe - 2.6.28.10+1-brcm47xx-1 -
libblkid - 1.41.5-1 -
libc - 0.9.30.1-26 -
libcurl - 7.19.6-1 -
libgcc - 4.1.2-26 -
libgd - 2.0.35-1 -
libiptc - 1.4.4-2 -
libjpeg - 6b-1 -
liblua - 5.1.4-5 -
libncurses - 5.7-1 -
libnl-tiny - 0.1-1 -
libopenssl - 0.9.8k-2 -
libpcre - 7.9-1 -
libpng - 1.2.38-1 -
libpthread - 0.9.30.1-26 -
librt - 0.9.30.1-26 -
libuci - 0.7.5-1 -
libuci-lua - 0.7.5-1 -
libusb - 0.1.12-2 -
libuuid - 1.41.5-1 -
libxtables - 1.4.4-2 -
lighttpd - 1.4.23-1 -
lua - 5.1.4-5 -
mtd - 8 -
ntpclient - 2007_365-1 -
nvram - 5 -
openssh-client - 5.2p1-1 -
openssh-client-utils - 5.2p1-1 -
openssh-server - 5.2p1-1 -
openssh-sftp-client - 5.2p1-1 -
openssh-sftp-server - 5.2p1-1 -
opkg - 215-2 -
php5 - 5.2.6-3 -
php5-mod-gd - 5.2.6-3 -
ppp - 2.4.4-1 -
ppp-mod-pppoe - 2.4.4-1 -
samba-common - 2.0.10-6 -
samba3 - 3.0.24-3 -
swap-utils - 2.13.0.1-2 -
uci - 0.7.5-1 -
ucitrigger - 0.7.5-1 -
udevtrigger - 106-1 -
usbutils - 0.84-2 -
vim - 7.1-3 -
vim-full - 7.1-3 -
wget - 1.11.4-1 -
wireless-tools - 29-4 -
zlib - 1.2.3-5 -
dmesg
Linux version 2.6.28.10 (lech@ubuntu) (gcc version 4.1.2) #1 Thu Aug 27 04:08:23 PDT 2009
CPU revision is: 00029006 (Broadcom BCM3302)
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x03, vendor 0x4243)
ssb: Core 1 found: Fast Ethernet (cc 0x806, rev 0x06, vendor 0x4243)
ssb: Core 2 found: Fast Ethernet (cc 0x806, rev 0x06, vendor 0x4243)
ssb: Core 3 found: USB 1.1 Hostdev (cc 0x808, rev 0x03, vendor 0x4243)
ssb: Core 4 found: PCI (cc 0x804, rev 0x08, vendor 0x4243)
ssb: Core 5 found: MIPS 3302 (cc 0x816, rev 0x03, vendor 0x4243)
ssb: Core 6 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
ssb: Core 7 found: IPSEC (cc 0x80B, rev 0x00, vendor 0x4243)
ssb: Core 8 found: MEMC SDRAM (cc 0x80F, rev 0x02, vendor 0x4243)
ssb: Initializing MIPS core...
ssb: core 0x0800, irq : 2(S) 3* 4 5 6 D I
ssb: core 0x0806, irq : 2(S) 3 4* 5 6 D I
ssb: core 0x0806, irq : 2(S) 3 4 5* 6 D I
ssb: core 0x0808, irq : 2(S) 3 4 5 6* D I
ssb: core 0x0804, irq : 2(S)* 3 4 5 6 D I
ssb: core 0x0816, irq : 2(S)* 3 4 5 6 D I
ssb: core 0x0807, irq : 2(S)* 3 4 5 6 D I
ssb: core 0x080b, irq : 2(S)* 3 4 5 6 D I
ssb: core 0x080f, irq : 2(S) 3 4 5 6 D I*
ssb: set_irq: core 0x0806, irq 4 => 4
ssb: set_irq: core 0x0806, irq 5 => 5
ssb: set_irq: core 0x0808, irq 6 => 2
ssb: set_irq: core 0x0804, irq 2 => 6
ssb: after irq reconfiguration
ssb: core 0x0800, irq : 2(S) 3* 4 5 6 D I
ssb: core 0x0806, irq : 2(S) 3 4* 5 6 D I
ssb: core 0x0806, irq : 2(S) 3 4 5* 6 D I
ssb: core 0x0808, irq : 2(S)* 3 4 5 6 D I
ssb: core 0x0804, irq : 2(S) 3 4 5 6* D I
ssb: core 0x0816, irq : 2(S)* 3 4 5 6 D I
ssb: core 0x0807, irq : 2(S)* 3 4 5 6 D I
ssb: core 0x080b, irq : 2(S)* 3 4 5 6 D I
ssb: core 0x080f, irq : 2(S) 3 4 5 6 D I*
ssb: Sonics Silicon Backplane found at address 0x18000000
Serial init done.
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00002000
On node 0 totalpages: 8192
free_area_init_node: node 0, pgdat 80272c40, node_mem_map 81000000
Normal zone: 64 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 8128 pages, LIFO batch:0
Movable zone: 0 pages used for memmap
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
PID hash table entries: 128 (order: 7, 512 bytes)
console [ttyS0] enabled
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 29688k/32768k available (2191k kernel code, 3080k reserved, 317k data, 136k init, 0k highmem)
Calibrating delay loop... 263.16 BogoMIPS (lpj=526336)
Mount-cache hash table entries: 512
net_namespace: 708 bytes
NET: Registered protocol family 16
Switched to high resolution mode on CPU 0
ssb: PCIcore in host mode found
PCI: Fixing up bridge 0000:00:00.0
PCI: Setting latency timer of device 0000:00:00.0 to 64
PCI: Fixing up device 0000:00:00.0
PCI: Fixing latency timer of device 0000:00:00.0 to 168
pci 0000:00:00.0: reg 10 32bit mmio: [0x000000-0x001fff]
pci 0000:00:00.0: reg 14 32bit mmio: [0x000000-0x7ffffff]
pci 0000:00:02.0: reg 10 32bit mmio: [0x000000-0x001fff]
pci 0000:00:03.0: reg 20 io port: [0xfce0-0xfcff]
pci 0000:00:03.0: supports D1 D2
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.1: reg 20 io port: [0xfce0-0xfcff]
pci 0000:00:03.1: supports D1 D2
pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot
pci 0000:00:03.1: PME# disabled
pci 0000:00:03.2: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:00:03.2: supports D1 D2
pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:03.2: PME# disabled
PCI: Enabling device 0000:00:02.0 (0000 -> 0002)
PCI: Fixing up device 0000:00:02.0
PCI: Setting latency timer of device 0000:00:02.0 to 64
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
ssb: SPROM revision 2 detected.
ssb: Sonics Silicon Backplane found on PCI device 0000:00:02.0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
detected lzma initramfs
initramfs: LZMA lc=1,lp=2,pb=2,origSize=512
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY) Š 2001-2006 Red Hat, Inc.
msgmni has been set to 57
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver2 ports, IRQ sharing enabled
serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:17:31:dc:08:f7
b44: eth1: PHY Reset would not complete.
eth1: Broadcom 44xx/47xx 10/100BaseT Ethernet 40:10:18:00:00:2d
flash init: 0x1c000000 0x02000000
Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Amd/Fujitsu Extended Query Table at 0x0040
Physically mapped flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Flash device: 0x800000 at 0x1fc00000
bootloader size: 262144
Creating 4 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x007f0000 : "linux"
0x00110c00-0x007f0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=4D0000, len=320000
0x004d0000-0x007f0000 : "rootfs_data"
0x007f0000-0x00800000 : "nvram"
BCM47xx Watchdog Timer enabled (30 seconds, nowayout)
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 136k freed
Please be patient, while OpenWrt loads ...
diag: Detected 'ASUS WL-500g Premium'
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
roboswitch: Probing device eth0: found!
b44: eth0: powering down PHY
mini_fo: using base directory: /
mini_fo: using storage directory: /jffs
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
device eth0.0 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: topology change detected, propagating
br-lan: port 1(eth0.0) entering forwarding state
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
b43-phy0: Broadcom 4318 WLAN found (core revision 9)
phy0: Selected rate control algorithm 'minstrel'
Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
PPP generic driver version 2.4.2
ip_tables: (C) 2000-2006 Netfilter Core Team
Driver 'sd' needs updating - please use bus_type methods
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
PCI: Enabling device 0000:00:03.2 (0000 -> 0002)
PCI: Fixing up device 0000:00:03.2
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.2: irq 6, io mem 0x40002000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
nf_conntrack version 0.5.0 (512 buckets, 2048 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
usb 1-2: new high speed USB device using ehci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.1: new high speed USB device using ehci_hcd and address 4
usb 1-2.1: configuration #1 chosen from 1 choice
uhci_hcd: USB Universal Host Controller Interface driver
PCI: Enabling device 0000:00:03.0 (0000 -> 0001)
PCI: Fixing up device 0000:00:03.0
uhci_hcd 0000:00:03.0: UHCI Host Controller
uhci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:03.0: irq 6, io base 0x00000100
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:03.1 (0000 -> 0001)
PCI: Fixing up device 0000:00:03.1
uhci_hcd 0000:00:03.1: UHCI Host Controller
uhci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:03.1: irq 6, io base 0x00000120
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using uhci_hcd and address 2
usbcore: registered new interface driver snd-usb-audio
usb 2-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
fuse init (API version 7.10)
fuse init: DCACHE_BUG enabled
scsi 0:0:0:0: Direct-Access USB 2.0 Flash Disk 5.00 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 16617472 512-byte hardware sectors: (8.50 GB/7.92 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 16617472 512-byte hardware sectors: (8.50 GB/7.92 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
usb-storage: device scan complete
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
