OpenWrt Forum Archive

Topic: USR5461 and OpenWRT

The content of this topic has been archived on 15 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
clemente
14 Oct 2009, 13:49

Hello out there...

i`ve tried a couple of times to flash my USR5461 with the OPENWRT-Soft.

I bricked and unbricked it and after a few attempts i give DD-WRT a try.

DD-WRT flash was succsessfull.


I`ve been able to flash the USR with DD-WRT but my traget is to flash it with OPEN-WRT ;-(

I am not able to change the header so i can flash with the Webgui of the USR.

If i try to flash the openwrt.bin from the DD-WRT-Webgui it resumes with an error.

So my question is, whether somebody can please give me a link to a patched

Kamikaze.bin (Kamikaze.usr), so i can flash it from the USR-Webgui.

Thanks a lot,

clemente

Post #2
mazilo
11 Nov 2009, 05:11

What is your current status on this?

The discussion might have continued from here.