Would anyone have advice on how to debug hostapd and or ath9k. I haven't been able to identify the problem, but basically what happens is I'm unable to associate with what appears to be a normal function access point running the RN2 card inside the routerboard/routerstation. I really don't know where to begin, but windows and mac laptops appear to do the same. It doesn't appear to actually connect, like just a general failure to associate. Any help would be greatful, and more info is probably needed, just not sure where to begin. I do have multiple routers in close proximity to each other and connections are non LOS at times, short distance though. Everything will work fine upon a reboot, but after time I find that I cannot associate with some of the access points.
Topic: Failure to associate with ath9k/mac80211 AP
The content of this topic has been archived on 7 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
The discussion might have continued from here.
Page 1 of 1