The content of this topic has been archived on 14 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hi,
What is the difference between these two ..
openwrt-ar71xx-dir-825-b1-squashfs
openwrt-ar71xx-dir-825-b1-squashfs-backup-loader
Are they the same? I updated with openwrt-ar71xx-dir-825-b1-squashfs-backup-loader .. does this mean now I can update with the other one if I need to?
Also, my 5Ghz SSID isn't showing up .. I enabled the network and configured it, 2.5Ghz shows up and this one does not. thanks
What is the difference between these two ..
openwrt-ar71xx-dir-825-b1-squashfs
openwrt-ar71xx-dir-825-b1-squashfs-backup-loader
My understanding is "...-backup-loader" will be accepted by DLink's firmware as an acceptable upgrade. If you're flashing from any 3rd party firmware, I think they're the same.
For the 5Ghz radio, make sure you've installed crda and set the reg domain. See this post for more info: https://forum.openwrt.org/viewtopic.php … 82#p101782
oleg106 wrote:What is the difference between these two ..
openwrt-ar71xx-dir-825-b1-squashfs
openwrt-ar71xx-dir-825-b1-squashfs-backup-loaderMy understanding is "...-backup-loader" will be accepted by DLink's firmware as an acceptable upgrade. If you're flashing from any 3rd party firmware, I think they're the same.
For the 5Ghz radio, make sure you've installed crda and set the reg domain. See this post for more info: https://forum.openwrt.org/viewtopic.php … 82#p101782
That worked, thanks. Both max out at 130 .. do you know if there is any way to improve this?
(Last edited by oleg106 on 13 Mar 2010, 01:01)
That worked, thanks. Both max out at 130 .. do you know if there is any way to improve this?
I haven't got into that much detail with mine yet. Not sure if I have that or higher, sorry. Glad you can access it, though.
For >130Mb I know you'll need HT40 enabled. But I don't know much more than that.
The discussion might have continued from here.