The content of this topic has been archived on 24 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
hello,
I want to send and receive Cisco Discovery Protocol.
send packages with: http://sourceforge.net/projects/scdp
receive (show the content): http://sourceforge.net/projects/cdpr
It is possible to build packages?
PS: older post with no answer:
http://openwrt.org/forum/viewtopic.php?id=1035
(Last edited by raymond on 23 Aug 2005, 11:25)
cdrp has already been ported and reported to work from this package : http://openwrt.alphacore.net/cdpr_2.2.0_mipsel.ipk
Now I will have a look at scdp
Here comes the scdp package :
http://openwrt.alphacore.net/experiment … mipsel.ipk
Please let me know whether it works or not !
after installing libnet and libgcc, it works, but my Cisco AP does not show any additional information about wireless clients. Probably need more investigation, what inormation Cisco AP expect. At least tcpdump shows it sending out something
21:02:33.716318 CDPv1, ttl: 180s, Device-ID 'Test'[|cdp]
i dont have any Cisco switch to try...
edit: cdpr does not receive any cdp information from Cisco AP's either. Any clue?
(Last edited by netmaster on 23 Aug 2005, 22:26)
The discussion might have continued from here.