Hello all
I have a tp-link wr841nd v5.3 router with a 4mb flash
The firmware that I use is kamikaze build r199990 (this is only the one that let me to enable wireless).
There is no place on the flash to install kismet (need about 60kb more ) after installing the atheros driver
After there is no way to install kismet on the flash, I’ve installed the luci-admin-full web interface
At the software tab I changed the OPKG configurations
From “option overlay_root /jffs” to “option overlay_root /tmp” to be able to install kismet to the ram (there is about 14MB free at the beginning, and I don’t mind if it will gone every restart)
So I installed bough the kismet-server and the kismet –client packages, but I can not run them ?
The system just don’t know that they exists, I also tried to find the files buy using “find” but with no luck
Anyone has an idea how can I install and run a kismet ? at least the drone part, but better is a server
Topic: kismet on tp-link tl-wr841nd
The content of this topic has been archived on 16 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
The discussion might have continued from here.
Page 1 of 1