I'm needing some help from someone that got this working on their DIR-825 Rev.B1. I successfully (as far as I can tell) flashed the firmware to the router using both methods, using the *factory*.bin from the D-Link utility and using the *backup*.bin from the recovery mode page. Both attempts got me the same thing... router starts up, flashes the power LED orange several times before the LAN LEDs all light and the power LED stays steady orange. Never once did the uplink LED light up. I telnet in and set my password, exit then ssh back in and have a prompt. I am unable to load the luci packages because wget says it can't find the server... so, I'm guessing I don't have a live internet connection? I've tried power cycling the cable modem and had no success. Anyone that got this working on an 825 that can help me... at least let me know what their LEDs did during a normal flash and startup? Also... under the standard firmware, the Power LED goes blue, does this not occur with OpenWRT?
For reference, DIR-825 rev.B1 with uplink connected to a Motorola Surfboard... not sure which model, Comcast is the ISP.
If it helps, I'm referring to the Globe icon as the Uplink LED, the Power icon to the Power LED, and the wired port activity indicators as the LAN LEDs... of course, wireless LEDs never come on, haven't gotten that far yet.