I tried to set up a bridge as described in

http://woz.gs/wifi/openwrtbridge.html but not able to get is working.

Any help would be appreciated.

my nvram settings are shown here

-------------------------------------
wl0_net_mode=mixed
os_ram_addr=80001000
wl0_frameburst=on
boardrev=0x10
il0macaddr=00:12:17:2b:fc:9d
et0macaddr=00:12:17:2B:FC:9B
wl0_wep_buf=
boot_wait=on
watchdog=5000
wl0_macmode1=disabled
wl0_infra=1
wl0_country_code=AU
et0mdcport=0
pmon_ver=CFE 2004.1.30.0
wl0_ifname=eth1
gpio2=adm_eecs
gpio3=adm_eesk
gpio5=adm_eedi
vlan0ports=1 2 3 4 5*
gpio6=adm_rc
wl0_mode=wet
wifi_netmask=255.0.0.0
os_flash_addr=bfc40000
wl0_gmode=6
sromrev=2
boardtype=0x0101
wl0_wep_last=
lan_netmask=255.255.255.0
wl0_dtim=1
wl0_ssid=test
wl0_key1=
wl0id=0x4320
wan_netmask=255.255.255.0
wl0_key2=
wl0_key3=
wl0_key4=
ag0=255
lan_stp=on
wl0_plcphdr=long
wl0_rate=0
wl0_closed=0
wl0_macmode=disabled
wl0_radioids=BCM2050
wl0_phytype=g
wl0gpio2=0
wl0_lazywds=1
wl0gpio3=0
boardflags2=0
wl0_antdiv=-1
wl0_wpa_psk=
wl0_mac_list=
wan_proto=static
wl0_unit=0
wl_country_code=AU
pa0itssit=62
wifi_proto=static
wl0_wds=
cctl=0
wl0_radius_port=1812
wl0_mac_deny=
wl0_auth=0
wl0_radius_ipaddr=
pa0maxpwr=0x48
clkfreq=200
lan_ipaddr=192.168.1.6
lan_proto=static
vlan1hwname=et0
aa0=3
wl0_phytypes=g
wl0_frag=2346
wl0_wep=off
sdram_config=0x0022
wl0_country=Worldwide
vlan1ports=0 5
scratch=a0180000
ccode=0
wl0_rateset=default
wl0_wep_bit=64
lan_ifname=vlan0
boardflags=0x0388
wl0_afterburner_override=-1
sdram_refresh=0x0000
sdram_ncdl=0x20622
wifi_ipaddr=10.0.0.6
wan_ipaddr=192.168.2.6
wl0_passphrase=
wl0_rts=2347
wl0_wpa_gtk_rekey=3600
wl0_key=1
wl0_active_mac=
et0phyaddr=30
wifi_ifname=eth1
wan_hostname=L6
wl0_radio=1
wl0_bcn=100
wl0_hwaddr=00:12:17:2B:FC:9D
wl0_wep_gen=
wl0_gmode_protection=auto
pa0b0=0x170c
wl0_maclist=
pa0b1=0xfa24
pa0b2=0xfe70
sdram_init=0x0008
vlan0hwname=et0
dl_ram_addr=a0001000
wl0_radius_key=
wl0_corerev=7
wl0_channel=6
wl0_auth_mode=disabled
boot_ver=v3.1
boardnum=42
---------------------------------------------