OpenWrt Forum Archive

Topic: Which Router for GPIOs?

The content of this topic has been archived on 12 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
DeusExMachina
5 Oct 2010, 07:24

Hi there,

I would need an old OpenWRT compatible Router with GPIOs.
With this GPIO I want to switch an relay to allow power control of multiple devices via Network.

Which Router would you recommend for this?

The Router should never touch the GPIO Line during bootup, otherwise it could touch the relay which would cause an power down (so thats a no go).

On the other hand, it does not need an internal switch, no wlan or anything else...
So as cheap as possible / also old ones ok.

But if you got an newer one / stocked in shops which is good and well priced, just talk to me

Thanks,

DeusEx

Post #2
arteqw
19 Oct 2010, 18:43

Routerstation Pro have 7 GPIOs.

Post #3
DeusExMachina
19 Oct 2010, 22:03

Thank you very much, I used some WGT634U now.
Works ;-).

Thanks,

DeusEx

The discussion might have continued from here.