OpenWrt Forum Archive

Topic: [DWL-2100AP] & Backfire 10.03.1-rc4

The content of this topic has been archived on 27 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

With Backfire 10.03.1-rc4 DWL-2100AP H/W Ver.:A2 works out of the box (kernel 2.6.30.10).

So I think it's time that one of dev's close tickets 8064 and 8299.

Here is bootlog:

RedBoot startup
Ethernet eth0: MAC address 00:0f:3d:af:eb:05
IP: 10.3.2.50/255.255.255.0, Gateway: 10.3.2.1
Default server: 10.3.2.2, DNS server IP: 0.0.0.0

RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version v2_0 - built 16:27:48, Jul  1 2007
With changes made by Waldeck Schutzer <waldeck@dm.ufscar.br>


Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x80000400-0x81000000, 0x80000400-0x807d1ce0 available
FLASH: 0xbfc00000 - 0xbffe0000, 62 blocks of 0x00010000 bytes each.
== Executing boot script in 4.000 seconds - enter ^C to abort
RedBoot> fis load -l linux
lzma_init: initialize the decoder
lzma_inflate: decompress stream
lzma_inflate; copy decodification code to RAM
Image loaded from 0x80041000-0x802ec200
RedBoot> exec
Now booting linux kernel:
 Base address 0x80080000 Entry 0x80041000
 Cmdline :
Linux version 2.6.30.10 (openwrt@ampere) (gcc version 4.3.3 (GCC) ) #1 Fri Nov 19 20:23:29 PST 2010
console [early0] enabled
CPU revision is: 0001800a (MIPS 4Kc)
Determined physical RAM map:
 memory: 01000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00001000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00001000
Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 4064
Kernel command line: console=ttyS0,9600 rootfstype=squashfs,jffs2
Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 16 bytes
NR_IRQS:128
PID hash table entries: 64 (order: 6, 256 bytes)
console handover: boot [early0] -> real [ttyS0]
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 13000k/16384k available (2181k kernel code, 3384k reserved, 415k data, 136k init, 0k highmem)
Calibrating delay loop... 179.81 BogoMIPS (lpj=899072)
Mount-cache hash table entries: 512
net_namespace: 1008 bytes
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
NET: Registered protocol family 1
Radio config found at offset 0x10000(0x100)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  Š 2001-2006 Red Hat, Inc.
msgmni has been set to 25
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered (default)
gpiodev: gpio device registered with major 254
gpiodev: gpio platform device registered with access mask FFFFFFFF
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0xbc000003 (irq = 37) is a 16550A
eth0: Atheros AR231x: 00:0f:3d:af:eb:05, irq 4
ar231x_eth_mii: probed
eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01)
physmap platform flash device: 00800000 at 1e000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
 CFI mfr 0x0000001f
 CFI id  0x000000c8
 Amd/Fujitsu Extended Query Table at 0x0041
  Amd/Fujitsu Extended Query version 1.0.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
Searching for RedBoot partition table in physmap-flash.0 at offset 0x3d0000
6 RedBoot partitions found on MTD device physmap-flash.0
Creating 6 MTD partitions on "physmap-flash.0":
0x000000000000-0x000000030000 : "RedBoot"
0x000000030000-0x000000110000 : "linux"
0x000000110000-0x0000003c0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=2B0000, len=110000
0x0000002b0000-0x0000003c0000 : "rootfs_data"
0x0000003c0000-0x0000003c1000 : "RedBoot config"
eth0: Configuring MAC for full duplex
0x0000003d0000-0x0000003e0000 : "FIS directory"
0x0000003e0000-0x000000400000 : "boardconfig"
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 136k freed
Please be patient, while OpenWrt loads ...
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
jffs2 not ready yet; using ramdisk
mini_fo: using base directory: /
mini_fo: using storage directory: /tmp/root
- init -

Please press Enter to activate this console. device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering forwarding state
PPP generic driver version 2.4.2
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
nf_conntrack version 0.5.0 (256 buckets, 1024 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ath_hal: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
ath_hal: 2009-05-08 (AR5212, AR5312, RF5111, RF5112, RF2316, RF2317, REGOPS_FUNC, TX_DESC_SWAP, XR)
ath_ahb: trunk
wlan: trunk
wlan: mac acl policy registered
ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (trunk)
ath_rate_minstrel: look around rate set to 10%
ath_rate_minstrel: EWMA rolloff level set to 75%
ath_rate_minstrel: max segment size in the mrr set to 6000 us
Atheros HAL provided by OpenWrt, DD-WRT and MakSat Technologies
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
ath_ahb: wifi0: Atheros 2313 WiSoC: mem=0xb8500000, irq=5
IRQ 5/wifi0: IRQF_DISABLED is not guaranteed on shared IRQs
jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
jffs2_build_filesystem(): unlocking the mtd device... done.
jffs2_build_filesystem(): erasing all blocks after the end marker...


BusyBox v1.15.3 (2010-11-11 22:22:00 PST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 Backfire (10.03.1-rc4, r24045) --------------------
  * 1/3 shot Kahlua    In a shot glass, layer Kahlua
  * 1/3 shot Bailey's  on the bottom, then Bailey's,
  * 1/3 shot Vodka     then Vodka.
 ---------------------------------------------------
root@OpenWrt:/# done.
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay

root@OpenWrt:/#
root@OpenWrt:/#
root@OpenWrt:/#
root@OpenWrt:/#
root@OpenWrt:/#
root@OpenWrt:/#
root@OpenWrt:/# free
              total         used         free       shared      buffers
  Mem:        13136        11040         2096            0         1308
 Swap:            0            0            0
Total:        13136        11040         2096
root@OpenWrt:/#
root@OpenWrt:/# df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/root                 1664      1664         0 100% /rom
tmpfs                     6568        32      6536   0% /tmp
tmpfs                      512         0       512   0% /dev
root                      1664      1664         0 100% /tmp/root
mini_fo:/tmp/root         1664      1664         0 100% /tmp/root
/dev/mtdblock3            1088       204       884  19% /overlay
mini_fo:/overlay          1664      1664         0 100% /
root@OpenWrt:/#

I have testet booth AP & client mode and it works just like it should.

Cheers!

Just 2 questions...

1) Is there a precompiled image to download? (if so,whic file should i download?)
2) Which is the flashing procedure?

Many thanks!

whether for DWL-2100AP H/W Ver.:A4 ?

Yes, should work, but for sure you shuld open the ap and post here what kind is your flash chip

The discussion might have continued from here.