OpenWrt Forum Archive

Topic: Flash Layout

The content of this topic has been archived on 2 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

I added this super cool table to the wiki:  http://wiki.openwrt.org/toh/tp-link/tl- … ash.layout

Please check if it is right, and also complete it. What is the "art"-Partition good for? NVRAM-Settings? But do we still use such?

Can I write on it and on "u-boot"? The Pogoplug does have some commands like fw_setenv or fw_printenv. I think they write to the u-boot partition, don't they?

Regards,
markus

ART = Atheros Radio Test - it contains mac addresses and calibration data for the wifi (EEPROM). If it is missing or currupt, ath9k won't come up anymore.

Please do not have wifi ART.BIN for TL-WR841ND v7.2 (64K), or TL-MR3220
found that the key Mac and pin this on wifi and boot dd-wrt installed you can copy tothe folder / tmp/mtd7 fimware which is the entire rom with the command (dd if = /dev/mtd/7 of = / tmp / backup.bin) and then just copy to the pc via winscp ok, thank you Brazil,

The discussion might have continued from here.