Topic: AR71xx Based 3 miniPCI boards with 11n radio and kernel timer change

The content of this topic has been archived on 4 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Page 1 of 1

Post #1

wifi802.11abgn

1 Feb 2011, 18:08

Hi all, i have a PB44 ref board with 3 miniPCI slot. I am trying to install 11n radios and doing testing with openWRT 2.6.32.25 kernel with combination of
atheros drivers and ath9k drivers..
while giving full load i am getting stuck beacon debug message

If i increase the kernel timer(high resolution timer) default value 100 to 256 ... i am not getting the stuck beacon message...

But i dont know whether it will effect the system ?

The discussion might have continued from here.

Page 1 of 1