Hi, i have a beta router WNDRMAC that is very similar to WNDR3700. This is the firmware..
http://rapidshare.com/files/450397778/W … -fix03.img

Is possible to install openwrt?
Thanks.

(Last edited by wndr_bt_fun on 1 Mar 2011, 13:36)

It has the same hardware id of wdnr3700v2.. can anyone help me??

The firmware seems to have the same magic number as the WNDR3700v2. You can try flashing that via the bootloader, using TFTP. You might not be able to flash it via the factory web UI because it has a different device name in the DNI header.

The magic number matching isn’t necessarily a strong indicator of compatibility with an unreleased product, though. If you can grab some boot messages (either from a serial console or by using dmesg—look around for telnetenable to gain access via telnet), you could compare those to what a shipping WNDR3700v2 produces and make a better determination.

I tried to flash my router with openwrt wndr3700v2's firmware via tftp but, when i upload firmware, power's led continued to blinking green and doesn't reboot..
These are 2 pics of internal..

(Last edited by wndr_bt_fun on 6 Mar 2011, 16:07)

Try connecting a TTL serial (the four pin pin header at the left bottom corner of the big shielding) and capture the output when booting/flashing.

I haven't got ttl serial->usb converter.. are there any other solution?

(Last edited by wndr_bt_fun on 7 Mar 2011, 00:55)

From wndrmac firmware:
device:WNDRMAC
version:V1.0.0.10-fix03
region:
hd_id:29763654+16+64

From wndr3700v2 firmware:
device:WNDR3700v2
version:V1.0.0.8
region:
hd_id:29763654+16+64

The two devices seems to have the same hardware id.. but why i can't flash wndr3700v2's firmware?!