OpenWrt Forum Archive

Topic: Cannot access to router - Linksys WRT54GL

The content of this topic has been archived on 15 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.


I canĀ“t get access to, luci interface. I've already have made a reset when the DMZ led start, and i've already put a static ip on my pc, and nothing.
I had on my configuration in Interface->lan->"static" and when i've changed to "DHCP", after this no web interface, and cannot ping to

This moment when i turn on my router, and when DMZ led start i pull down the reset button and DMZ start blinking, this way i can make telnet to and get in, but i cannot go to web interface.

Does anyone know how to reset to defaults on telnet session?

To clear out everything and get it back to initial install conditon do this:

mtd -r erase rootfs_data

The discussion might have continued from here.