The content of this topic has been archived on 8 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
I did an upgrade from dd-wrt to openwrt via dd-wrt upgrade gui
I grabbed my wrt350n v1 router image bin file here
http://downloads.openwrt.org/backfire/10.03/brcm47xx/
The upgrade was successful, I rebooted, but now I can't get into the GUI. Also, the Power LED keeps blinking. Internet works fine for connected clients.
Did I make a mistake?
Also, default ip address changed to 192.168.11.1 (now 11 in place of prev 1)
Thanks for any advice!
(Last edited by sodapopdima on 24 Mar 2011, 17:32)
Try to use telnet or ssh, and see what is wrong
Try to use telnet or ssh, and see what is wrong
And post the output from '/www/cgi-bin/luci'.
MiklerGM wrote:Try to use telnet or ssh, and see what is wrong
And post the output from '/www/cgi-bin/luci'.
maybe you should configure the firewall to enable web access to your router
The discussion might have continued from here.