OpenWrt Forum Archive

Topic: How-to convert .trx to .bin

The content of this topic has been archived on 5 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
MiklerGM
2 Apr 2011, 14:07

Hello, how i can convert firmware.trx to firmware.bin

I prepare a firmware for a friend, but i don't want to explain him how-to use tftp.
Default firmware didn't accept a trx image from web-interface.

Router dlink, dir320

Thank you.
Sorry for my english.

Post #2
jameslord
11 Apr 2011, 22:01
MiklerGM wrote:

Hello, how i can convert firmware.trx to firmware.bin

I prepare a firmware for a friend, but i don't want to explain him how-to use tftp.
Default firmware didn't accept a trx image from web-interface.

Router dlink, dir320

Thank you.
Sorry for my english.

how did you get your trx image?
i compile openwrt from backfire, after this build process i got lots of bin images, and no trx file, so don't you get any bin file after compilation?

Post #3
MiklerGM
12 Apr 2011, 10:19

I compile openwrt and now i have this

$ ls bin/brcm47xx/ wrote:

md5sums                        openwrt-wrt150n-squashfs.bin                openwrt-wrt54g3gv2-vf-squashfs-sysupgrade.bin
openwrt-brcm47xx-squashfs.trx  openwrt-wrt300n_v11-squashfs.bin            openwrt-wrt54g-squashfs.bin
openwrt-usr5461-squashfs.bin   openwrt-wrt300n_v1-squashfs.bin             openwrt-wrt54gs-squashfs.bin
openwrt-wa840g-squashfs.bin    openwrt-wrt350n_v1-squashfs.bin             openwrt-wrt54gs_v4-squashfs.bin
openwrt-we800g-squashfs.bin    openwrt-wrt54g3g-em-squashfs.bin            openwrt-wrt610n_v1-squashfs.bin
openwrt-wgt634u-squashfs.bin   openwrt-wrt54g3g-squashfs.bin               openwrt-wrtsl54gs-squashfs.bin
openwrt-wr850g-squashfs.bin    openwrt-wrt54g3gv2-vf-squashfs-factory.bin  packages

I think that for Dlink Dir320 i need to use openwrt-brcm47xx-squashfs.trx and what i need for netger wrn3500l? or i need to choose other "target"?

Post #4
jameslord
24 Apr 2011, 08:57
MiklerGM wrote:

I compile openwrt and now i have this

$ ls bin/brcm47xx/ wrote:

md5sums                        openwrt-wrt150n-squashfs.bin                openwrt-wrt54g3gv2-vf-squashfs-sysupgrade.bin
openwrt-brcm47xx-squashfs.trx  openwrt-wrt300n_v11-squashfs.bin            openwrt-wrt54g-squashfs.bin
openwrt-usr5461-squashfs.bin   openwrt-wrt300n_v1-squashfs.bin             openwrt-wrt54gs-squashfs.bin
openwrt-wa840g-squashfs.bin    openwrt-wrt350n_v1-squashfs.bin             openwrt-wrt54gs_v4-squashfs.bin
openwrt-we800g-squashfs.bin    openwrt-wrt54g3g-em-squashfs.bin            openwrt-wrt610n_v1-squashfs.bin
openwrt-wgt634u-squashfs.bin   openwrt-wrt54g3g-squashfs.bin               openwrt-wrtsl54gs-squashfs.bin
openwrt-wr850g-squashfs.bin    openwrt-wrt54g3gv2-vf-squashfs-factory.bin  packages

I think that for Dlink Dir320 i need to use openwrt-brcm47xx-squashfs.trx and what i need for netger wrn3500l? or i need to choose other "target"?

select the image which matches the processor of your router:)

The discussion might have continued from here.