I have one of these going spare, they work with OpenWRT in some way but I've not get the time to work out the bugs.

They are atheros based with an AR5312A CPU, they have 2 dual channel A/G radios and PoE as well as normal power.

They seem to be able to boot OpenWRT and then chain load dd-wrt from tinkering I've managed to brick one of them and still have another spare.

If anyone wants the bricked (needs JTAG fixing) or the unbricked one PM me, they are free just needs to have postage from the UK covered. I'd rather they go to a developer if possible but anyone is welcome to ask.

More info:

http://www.dd-wrt.com/phpBB2/viewtopic.php?p=537868 - I've tested this it works.

https://forum.openwrt.org/viewtopic.php?id=9634

Hello NightShade i got some wag102 and all of them are updated with 1.5.9 Light AP firmware
In this configuration i cant log on them via web or entry any of settings, i successfully connect to the terminal but i don't know where i can find a wag102.img  firmware file (the wag102 use tftp from the boot recovery mode @ 192.168.0.36) at the terminal i got a standard VXWORKS menu

[Boot]: ?

?                     - print this list
@                     - boot (load and go)
p                     - print boot params
c                     - change boot params
e                     - print fatal exception
v                     - print version
B                     - change board data
S                     - show board data
n netif               - print network interface device address<br>
$dev(0,procnum)host:/file h=# e=# b=# g=# u=usr [pw=passwd] f=# tn=targetname s=script o=other
boot device: tffs=drive,removable     file name: /tffs0/vxWorks
Boot flags:
0x02  - load local system symbols
0x04  - don't autoboot
0x08  - quick autoboot (no countdown
0x20  - disable login security
0x40  - use bootp to get boot parameters
0x80  - use tftp to get boot image
0x100 - use proxy arp
available boot devices: Enhanced Network Devices ae0 tffs

im not quite sure how to do anything @ this moment when i upload img file  i always get an error
if you can help me i would be grateful

For terminal i make a Fonera serial cable
http://www.dd-wrt.com/wiki/images/b/bb/ … ematic.jpg

you know you live in the middle of nowhere if at the local electronic shop they don't have a PCB plates and you use a cardboard
or the 2n2222 transistor are from 88.r

http://s1.bild.me/bilder/240416/9822050IMG_0003.JPG