Is anyone working on porting the broadcom et driver (used in the asus wl500gd) to the 2.6 kernel?
I might be interested in paypaling someone a bounty to do so...
Topic: porting broadcom et driver to kernel 2.6
The content of this topic has been archived on 28 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
cell wrote:
Is anyone working on porting the broadcom et driver (used in the asus wl500gd) to the 2.6 kernel?
I might be interested in paypaling someone a bounty to do so...
It can be replaced by b44 driver.
great! is there anything else preventing the 2.6 kernel version of openwrt from running on the asus wl500gd?
A lot, f.e. board-specific fixes, mtd driver, and so on.
-w-
is anyone working on these things? I don't have kernel programming experience, but am versed in C. I'd like to try my hand at helping this along.
Are there any binary-only module or tools needed for OpenWRT? If yes, are there harware versions (Linksys, Netgear, ASUS,...) where we have sources for everything and do not need binary drivers/tools?
The discussion might have continued from here.
Page 1 of 1